AEI Security & Communications DigiSender HQ2 DG258 User Manual page 6

DG258 - DigiSender® HQ2 - Twin Input 5.8GHz Wireless AV Sender
continued...
Note:
Try to avoid positioning the DG258 Transmitter directly on top of other electrical devices as this could
lead to a poor picture.
5.
Connect the Power Supply Unit (PSU) to the
socket labelled 'PSU' on the rear of the DG258
Transmitter.
A/B
What's the
The Contrast (A/B) switch is present to compen-
sate for differences in equipment set-ups.
Once installation is
complete, if you
experience a poor
picture try
adjusting the
A/B setting.
Page 06
??
switch for
Please read this instruction manual carefully prior to installation
6.
Connect the Power Supply Unit (PSU) to an
available mains socket.