Web Gui Overview; Connecting To The Webui - Teltonika WiMAX User Manual

Web GUI OVERVIEW

In this section you will be briefly introduced to our user interface.
Note: we use an intuitive tool tip system in our web user interface which displays additional data
for the user. To see this data hover your mouse cursor above the field. Also, if the frame of the field
becomes red, it usually means that the data in the field is incorrect, in this case look into red tool
tip for more information.

Connecting to the WebUI

To connect to the configuration web page do the following steps:
1. Make sure that IP address is set to be obtained automatically via DHCP on your computer.
2. Type 192.168.0.1
disabled.
3. Window asking for authentication will pop up. Enter your username and password (default:
username: user, password: user) and press enter.
4. Status window will appear in a few seconds:
First page of WebUI
10
to your favorite internet browser. Skip the step 2 if the password is