Fine-Tuning Instructions; Installing Water Bottle Cages - Cervélo S5 Supplementary Manual

STEP 5
• Measure, cut, and install the chainstay to rear derailleur cable
housing and proceed with front and rear derailleur installation
and adjustment as per the derailleur manufacturer's guidelines.

3. FINE-TUNING INSTRUCTIONS

A. Installing Water bottle Cages
• The S5 was designed to offer the
best possible aerodynamics
on a road bicycle, while remaining
customizable to the rider's specific
hydration requirements. As
traditional bottle designs are
inherently un-aerodynamic, the S5
offers options for customized mounting.
Maximized aerodynamics
• Tests have proven that the most aerodynamic position for a
traditional round feeding bottle is low on the down tube.
• Mount your bottle cage to the lower two M5 inserts on the
down tube. Tighten the bolts to a maximum of 3Nm.
Maximized Fluid Capacity
• If you have greater hydration requirements than a single bottle
can supply, you will need to use the seat tube location to locate
your second bottle.
• Attach the first bottle cage to the seat tube mounted M5 inserts
and tighten the bolts to a maximum of 3Nm.
Cervélo S5 Supplementary Manual 19