Table of Contents
Advertisement
Connecting video components
Turn off all components before making connections.
• Illustrations of the input/output terminals are typical examples.
When you connect other components, refer also to their manuals
since the terminal names actually printed on the rear vary among
different components.
Digital connection
DIGITAL 3
DIGITAL 2
DIGITAL IN
(DVD)
(STB)
CENTER
VR
AV IN /OUT
TV
DIGITAL 1
SPEAKER
(VR)
DIGITAL 3
DIGITAL 2
DIGITAL IN
(DVD)
(STB)
DVD
AV IN
STB
CAUTION:
SPEAKER
SUBWOOFER
IMPEDANCE
8 ~ 16
OUT
Before connecting
an optical digital
cord, unplug the
protective plug.
NOTES
• When shipped from the factory, the DIGITAL IN terminals have been set for use with the
following components:
– DIGITAL 1 (VR) (coaxial): For VR (VDR)
– DIGITAL 2 (STB) (optical): For STB (Set Top Box)
– DIGITAL 3 (DVD) (optical): For DVD player
If you connect other components, change the digital input (DIGITAL IN) terminal setting
correctly. See "Setting the digital input (DIGITAL IN) terminals—DIGITAL IN" on page 19.
• Select the correct digital input mode.
See "Selecting the analogue or digital input mode" on page 11.
Digital optical cord (not supplied)
DIGITAL 1
(VR)
Digital coaxial cord
(supplied: 1 cable)
SURROUND
FRONT
SPEAKERS
SPEAKERS
RIGHT
LEFT
RIGHT
LEFT
CAUTION:
If you connect a sound-enhancing device such as a graphic equalizer
between the source components and this receiver, the sound output
through this receiver may be distorted.
OPTICAL
DIGITAL OUT
COAXIAL
DIGITAL OUT
Getting started
DVD Player
STB (Set Top Box)
VR (VDR)
7
Advertisement
Table of Contents
