Network] Tab; [General Settings] - [Ethernet Settings]; [General Settings] - [Local Interface Settings]; [Tcp/Ip Settings] - [Tcp/Ip Settings] - Konica Minolta bizhub C3850 User Manual

1.5 Available operations in Administrator mode
1.5.7

[Network] tab

[General Settings] - [Ethernet Settings]

To display: Administrator mode - [Network] - [General Settings] - [Ethernet Settings]
Specify the network speed, and check the MAC address.
Item
[Speed/Duplex]
[MAC Address]

[General Settings] - [Local Interface Settings]

To display: Administrator mode - [Network] - [General Settings] - [Local Interface Settings]
Change the time-out time to limit a communication with the computer.
Item
[I/O Timeout]

[TCP/IP Settings] - [TCP/IP Settings]

To display: Administrator mode - [Network] - [TCP/IP Settings] - [TCP/IP Settings]
Configure the TCP/IP settings.
Item
[TCP/IP]
[LPD]
[SLP]
[LLMNR]

[TCP/IP Settings] - [IPv4 Settings]

To display: Administrator mode - [Network] - [TCP/IP Settings] - [IPv4 Settings]
Assign an IP address (IPv4) to this machine.
Item
[IP Address Setting
Method]
[IP Address]
[Subnet Mask]
[Default Gateway]
[Domain Name Auto-
matic Acquisition]
[DNS Server Automatic
Acquisition]
bizhub C3850/C3350
Description
Select the network speed according to your environment.
[Auto] is specified by default.
Displays the MAC address of the network interface card of this machine.
Description
When this machine is connected via a USB device to the computer, change the
communication time-out time if necessary.
[60] sec. is specified by default.
Description
Select whether or not to use TCP/IP.
[Enable] is specified by default.
Select whether or not to use LPD (Line Printer Daemon).
[Enable] is specified by default.
Select whether or not to use SLP (Service Location Protocol).
[Enable] is specified by default.
Select whether or not to use LLMNR (Link-local Multicast Name Resolution).
[Enable] is specified by default.
Description
When automatically specifying the IP address, select the method for automatic
retrieval.
• [DHCP]: [ON] (selected) is specified by default.
• [BootP]: [OFF] (not selected) is specified by default.
• [ARP/PING]: [OFF] (not selected) is specified by default.
• [Auto IP]: [ON] (selected) is specified by default.
When manually specifying the IP address, enter the fixed IP address.
When manually specifying the IP address, enter the subnet mask.
When manually specifying the IP address, enter the default gateway.
When using the DHCP or other protocols, select whether or not to automati-
cally retrieve the domain name.
[Enable] is specified by default.
Select whether or not to automatically obtain the address of the DNS server.
[Enable] is specified by default.
1
1-53