Amonstar GLUE BINDING MACHINE Operation Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

U K A S

GLUE BINDING MACHINE

QUAL ITY

MANAGEMEN T

Registra tion No. 14-A

OPERATION MANUAL

Table of Contents

Need help?

Do you have a question about the GLUE BINDING MACHINE and is the answer not in the manual?

Questions and answers

Summary of Contents for Amonstar GLUE BINDING MACHINE

Page 1 U K A S GLUE BINDING MACHINE QUAL ITY MANAGEMEN T Registra tion No. 14-A OPERATION MANUAL...
Page 2 Notice 1.Control section 1).This section consist of control panel , digital screen, key of “confirm”,” +””-” ,etc . 2)”Txx” on digital screen indicate the environmental temperature before heating . 2.Setting of temperature controller 1).Press the key of “ok”, video indicate setting temperature ,then adjust the temperature to around 150 by pressing “+”, “-”.
Page 3 Notice will back to current temperature and show 3.Turn on the machine after setting.same . “HXX” .In the meantime ,relay pick-up and glue box start heating ,the showing Phenomena Reason Solution temperature rise gradually and up to the setting 150°during 15-20 minutes. The relay Thermal Tube Replace thermal Indicate:ER-01...
Page 4: Table Of Contents
List HONEST AND BOON Thanks for choosing binding machine. List ............1 For operation easily and better binding result, Packing list and installation ....2 now promote new model of 4 machine, it is Precautious ..........2 binding, creasing, cutting perfect all in one. Operate parts ..
Page 5: Packing List And Installation
Binding Machine Packing list Installation and Precautios Installation Packing list 1. 1 unit of machine Please put this machine onto a stable worktop, avoid 2. 1 set of soft cover template approaching any humidity. Certain space should be kept to 3.
Page 6 OPERATION PARTS handle long shaft milling cutter short handle vernier adjust front board bolt for gelatinize clamp plate temperature controller glue box Height adjust glue receiving tray bolt for gelatinize backing board allocation shaft adjust bolt for allocation shaft round button short handle Height adjust bolt for gelatinize paddle...
Page 7: Operation Manual(Soft Cover)
Operation manual(soft cover) 1. Press the handle and draw out the 2 .Put the cover in-between the paper 3. Put the paper in-between the cover paper Pressurer pressurer and platform, and keep it and paper pressurer, piling it up neatly. close to the localizer.The platform could be raised so that the cover could be easily placed.
Page 8 Operation manual(soft cover) 4. Push the paper pressurer down 5 . P r e s s p a d d l e d o w n t o “ ” 6. Push paddle to “ ” position, rotate against the paper and rotate the handle position, so that a crease can be made the platform upwards and make sure the up, locking the paper in as the picture...
Page 9 Operation manual(soft cover) 7. Push the milling cutter back and 8. Gelatinize by moving glue box 9. After gelatinizing, Immediately forth on the bottom side of files draught the back cover slightly by left hand, press the paddledown to “ ”...
Page 10 Operation manual(soft cover) 10. Push the paper pressurer down 11. Press the handle down, draw the against the paper and rotate the handle paper pressurer open, and take out the up, turn the book to back face and put in made-book.
Page 11: Operation Manual(Hard Cover)
Operation manual (hard cover) Before operation: ① Prepare the hard cover ②Replace the paper pressurer complied for hard cover and allocation shaft. Allocate the operation handle to “ ” position ③ 1. Press the handle and draw out the 2. Put the hard cover in-between the 3.
Page 12 Operation manual (hard cover) 5. Push the milling cutter back and 6. Press the back cover of hard cover 4 . Push the paddle to “ ” position, rotate the platform upwards. forth movement on the botton side of close to platform document,gelatinize by files.
Page 13 Operation manual (hard cover) 8. Draw out the paper pressurer, turn 9. Take out the made-files and tear the 7. Draw the paddle back to “ ” position the book to back face and put in again, seal paper,back up the mount of the and then press it to “...
Page 14: Adjustment Of Gluing Roller
Adjustment of the gluing roller Step 1 Step 2 1. Place a piece of sheet(thickness:0.8mm,320mm* 8. Loosen the bolt(1)in picture B 60mm)on to the platform 9. Adjust bolt(3),until the roller touches the back surface of paper 2. Place pile of 25mm—thickness paper on the right 10.
Page 15: Adjustment Of Milling Blade
Adjustment of milling blade 1. The milling depth can be adjusted by adjusting the 2. The milling range can be adjusted by adjusting the range depth adjusting bolt Loose the adjusting bolts on milling adjusting bolt. Loose the adjusting bolt on blade, move the blade, move the blade to suitable place, then tighten the blade to suitable place, then tighten the bolt.
Page 16: Using Of Creasing Setting
Using of marking setting 1. Creasing setting is one accessory of 4 3. Blade replacing, twist the blade knob, install right there are four kinds of different blades, blade, then twist the blade knob back. creasing blade, undee blade, beeline blade and breakpoint blade.
Page 17: Using Of Hardback Setting
Using of hardback setting （ Image two ）（ Image one ）（ Image three ） 1. Ready for hardback operation, take down the pressure plate A. (Image one) 2. Put the cover in between the pressure plate and platform, fixup it by the localizer. (Image two) 3.
Page 18 Using of hardback setting （ Image four ）（ Image five ）（ Image six ） 7. Overturn the platform, press out the cover and the paper by the pressure plate, take out the book and press out the inverse side. 8.
Page 19: Malfunctions, Causations And Solution
1. Malfunctions, causations and solution Malfunctions Possible causations Solutions 1.the fuse of power source is burned Replace a new fuse eplace a new fuse 2.The melting fuse tube is burnt The melting fuse tube is burnt melting fuse tube is burnt Replace a new tubes eplace a new tubes The glue box can�t be...