Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for SPIDER ILD02 SG
Summary of Contents for SPIDER ILD02 SG
- Page 1 R O T A R Y S L O P E M O W E R OPERATION MANUAL ILD02 SG original Operation manual revision 01-01-04-2011 Dvořák – svahové sekačky, s.r.o. Tel: +420 569 425 767 Dvorce 62 Fax: +420 569 429 239 Havlíčkův Brod...
-
Page 2: Table Of Contents
Operator Manual - Spider ILD02 SG 1 CONTENTS 1 CONTENTS ..............................2 2 INTRODUCTION ............................4 2.1 IMPORTANT ............................4 2.2 MACHINE USAGE ..........................5 2.3 PROHIBITED USE ..........................6 2.4 PRODUCT IDENTIFICATION ........................7 2.5 GUIDELINES FOR THE DISPOSAL OF SCRAP PRODUCTS ............8 3 SAFETY INSTRUCTIONS ..........................9 4 SPECIFICATION ............................ - Page 3 Operator Manual - Spider ILD02 SG 11.19 LUBRICATION ..........................41 11.20 CLEANING THE MACHINE ......................42 11.21 TORQUE CHART ..........................42 11.22 OIL VISCOSITY ..........................42 11.23 TECHNICAL PLATE ........................43 11.24 TOOLS ............................. 43 11.25 AUXILIARY DRIVE BRAKE ......................44 12 TROUBLESHOOTING ..........................
-
Page 4: Introduction
Operator Manual - Spider ILD02 SG 2 INTRODUCTION 2.1 IMPORTANT This is a precision machine and the service obtained from it depends on the way it is operated and maintained. This OPERATION MAUAL should be regarded as part of the machine and should always be present at the machine and available to the operator. -
Page 5: Machine Usage
Maximum slope is 20° For all areas and applications: The Spider is a mulching mower designed for mowing of unkempt or only occasionally mowed areas. The mower is operated by one person using radio control. The mower may only be operated by authorized persons over 18 years of age both mentally and physically fit, who are familiar with this Safety, Operator’s and Maintenance Manual and all applicable regulations and... -
Page 6: Prohibited Use
Operator Manual - Spider ILD02 SG 2.3 PROHIBITED USE The mower may not be used for other purpose than for which it was designed and which is described in chapter 2.2. The mower may not be used on surfaces littered by glass, loose stones, pieces of iron and other foreign objects that can either be thrown by the blades during mowing or damage the mower. -
Page 7: Product Identification
Operator Manual - Spider ILD02 SG 2.4 PRODUCT IDENTIFICATION On the internal engine you can also find a factory label placed there by the engine manufacturer. We strongly recommend that you copy this data to the chart below while taking over the machine and... -
Page 8: Guidelines For The Disposal Of Scrap Products
Operator Manual - Spider ILD02 SG • 2.5 GUIDELINES FOR THE DISPOSAL Other worn out items should be separated into material groups for recycling and disposal OF SCRAP PRODUCTS consistent with available facilities. More common separation types are as follows:... -
Page 9: Safety Instructions
Operator Manual - Spider ILD02 SG 3 SAFETY INSTRUCTIONS started. When engaging the mower blade, step This safety symbol indicates important aside far enough to be protected against object safety messages in this manual. When accidentally thrown from the mower and to be... - Page 10 Operator Manual - Spider ILD02 SG While operating or transporting the mower, the to keep the operator away from the stream of operator must always have the mower in their exhaust gas, dust or mulched grass. view. The maximum distance between the...
- Page 11 Operator Manual - Spider ILD02 SG Turn off the mowing mechanism, shut off the Always control the machine from a working engine and remove the key from the ignition station, which gives you a perfect view of the every time: whole working area and of the machine.
-
Page 12: Specification
Operator Manual - Spider ILD02 SG 4 SPECIFICATION 4.1 SPECIFICATION TECHNICAL DESCRIPTION The mower is a self-propelled machine with four-wheel drive, controlled by the transmitter (remote radio controller) signal. Its unique wheel-steering technology ensures a high manoeuvrability both on level ground and on slopes. -
Page 13: Conformity Certificates
Operator Manual - Spider ILD02 SG 4.3. CONFORMITY CERTIFICATES EC DECLARATION OF CONFORMITY DVOŘÁK - svahové sekačky s.r.o. We manufacturer Kyjov - Dvorce 62 580 01 Havlíčkův Brod Business ID: 26013797 declare that the product name: Slope applicable rotary mower... -
Page 14: Decals
Operator Manual - Spider ILD02 SG 5 DECALS Attention! This machine may be dangerous. Incorrect and negligent use may result in damage, serious injuries or death. This chapter is devoted to the safety symbols (pictograms) used on the product, their placement and meaning. - Page 15 Operator Manual - Spider ILD02 SG 15 / 51 rev. 01-01-04-2011...
-
Page 16: Recommended Metods Of Operation
Operator Manual - Spider ILD02 SG 5.1 RECOMMENDED METODS OF OPERATION This chart shows basic information about recommended methods of cutting grass in various types of terrain. It also describes the correct procedure of anchoring the hydrostatic stabilizing winch. However current terrain and climatic conditions may require different methods of operation than those shown in this chart. - Page 17 Operator Manual - Spider ILD02 SG Instructions for turning on and off the hydrostatic winch Rotate the machine so that the Turn the wheels so that they are Turn off the blades Reduce the engine RPM to winch is facing up the hill toward...
-
Page 18: Controls
Operator Manual - Spider ILD02 SG 6 CONTROLS 6.1 REMOTE RADIO CONTROLLER NBB 1 Main Switch / EMERGENCY STOP button 2 Driving speed controller H/L 3 Engine stop switch 4 Engine starter switch 5 Mowing blades ON switch 6 Mowing blades OFF switch... -
Page 19: Mower Controls
Operator Manual - Spider ILD02 SG 6.2 MOWER CONTROLS On the body of the mower there are two controls for operating the mower. Additional controls may be added in case of attaching optional accessories. The function of controls pertaining to these accessories is explained in the user’s manuals of these devices. -
Page 20: Displays
Operator Manual - Spider ILD02 SG 7 DISPLAYS 7.1 NBB RADIO CONTROLLED DISPLAYS Indicator (11) flashes – RC power ON indicator Radio control emits a high pitch tone - RC battery low voltage warning 7.2 MOWER DISPLAYS 1. Power indicator 5. -
Page 21: Safety Systems
Operator Manual - Spider ILD02 SG 8 SAFETY SYSTEMS 8.1 MOWER SAFETY SYSTEMS The product is controlled by a remote radio controller. This means that the operator is not close to the mower at all times and cannot use controls on the mower. For the safety of the operator and other persons the following... -
Page 22: Preparing The Machine
Operator Manual - Spider ILD02 SG 9. PREPARING THE MACHINE 9.1 MACHINE DELIVERY TO A DEALER OR RETAILER NOTICE: if you have a lifting device with a sufficient From the manufacturer the machine is lifting capacity available, place the lifting hooks/eyes... -
Page 23: Hydraulic Pump By-Pass
Operator Manual - Spider ILD02 SG 9.2 HYDRAULIC PUMP BY-PASS The By-pass is used to disable the hydraulic drive and to engage the oil bypass for manual handling (engine not running) of the machine on flat surfaces. The by-pass should only be used when the hydraulic drive is not functional. -
Page 24: Checking Hydraulic Drive Oil Level
Operator Manual - Spider ILD02 SG 9.4 CHECKING HYDRAULIC DRIVE OIL LEVEL Oil level should only be checked when the oil is cold. Clear debris from around the cap; unscrew the cap on the hydraulic oil tank on the side of the mower. -
Page 25: Fuel Tank
Operator Manual - Spider ILD02 SG 9.6 FUEL TANK The fuel tank is placed on the frame on one side of the mower. The tank has a screw-on cap A. Before refuelling always stop the engine. Do not smoke or approach open flames or sources of sparks when manipulating with gasoline. -
Page 26: Operation
Operator Manual - Spider ILD02 SG 10 OPERATION 10.1 TRANSPORTING THE MOWER The mower should be transported to the mowing area on a trailer or other suitable transport vehicle. Transporting the mower on thoroughfares on its own wheels is prohibited... -
Page 27: Starting The Engine Of The Mower
Operator Manual - Spider ILD02 SG 10.2. STARTING THE ENGINE OF THE MOWER Wait till lamps 1 and 3 are illuminated and lamp 2 is Check the gasoline in the fuel tank; refuel with flashing (on the mower), then press the horn button unleaded gasoline BA95 if necessary. -
Page 28: Shutting Off The Engine
Operator Manual - Spider ILD02 SG 10.3 SHUTTING OFF THE ENGINE Before shutting off the engine, always disengage the mowing mechanism drive on the remote radio controller. Do not shut the engine off immediately after mowing; let it run for a short while with the minimum engine... -
Page 29: Engaging The Blades
Operator Manual - Spider ILD02 SG 10.5 ENGAGING THE BLADES The mowing blades can only be engaged when the engine is running. Set the maximum mowing height with controller (7). First increase the engine speed by regulator (14), then push the button for blades engagement (5) –the mowing device turns on. -
Page 30: Driving The Machine
Operator Manual - Spider ILD02 SG 10.8 DRIVING THE MACHINE 10.9 DRIVING SPEED OF THE The machine movement is controlled by MOWER joystick (8) (forward and reverse) (see the symbol under the controller on the remote Always choose a suitable driving speed,... -
Page 31: Driving On Slopes
Operator Manual - Spider ILD02 SG 10.10 DRIVING ON SLOPES Before operating on slopes, make sure that no one is below the mower or the working area. Driving on slopes is very demanding for the Do not endanger third persons by the operator, as they constantly have to evaluate movement of the mower. -
Page 32: Maintenance And Lubrication
Operator Manual - Spider ILD02 SG 11 MAINTENANCE AND LUBRICATION 11.1 MAINTENANCE CAHRT - MOWER Machine Maintenance Plan údržby stroje Visually check for oil leakage from engine and hydraulic systems Grease all sliding bars (at least once a season) Lubricate other lubrication points with dry lubricant in... -
Page 33: Maintenance Chart - Engine
Operator Manual - Spider ILD02 SG 11.2 MAINTENANCE CHART - ENGINE Engine maintenance chart: Kawasaki FH 680 V 23 HP Maintenance Period according to the operating hours counter After first Every Every Every Every Daily Every * = Perform more often in dusty conditions... -
Page 34: Engine Maintenance
Operator Manual - Spider ILD02 SG 11.3 ENGINE MAINTENANCE NOTICE: The following activities are considered to be workshop maintenance and should be carried out by trained personnel. Before beginning any maintenance activity on the mower, turn off the engine, push the emergency button and remove the key from the button. -
Page 35: Maintaining The Hydraulic Drive
Operator Manual - Spider ILD02 SG 11.6 CHECKING AND REFILLING OIL 11.5 MAINTAINING THE HYDRAULIC DRIVE Check the oil level in the hydraulic oil tank daily. The maintenance of the hydraulic drive requires Measure the oil level with the dipstick in the cap of properly trained service personnel. -
Page 36: Drive V-Belts
Operator Manual - Spider ILD02 SG 11.8 DRIVE V-BELTS Check the wear and tension of the V-belts and the tensioning devices. Hydraulic pump drive Located under the cutter deck inside cover (A). The V-belt is tensioned by a belt pulley. To tighten the belt dismount the belt pulley and remove the required number of spacers. -
Page 37: Final Gear Drive To Wheels
Operator Manual - Spider ILD02 SG 11.10 FINAL GEAR DRIVE TO WHEELS If you do not possess necessary equipment and skills, have this work performed by an authorized service/dealer. Remove the cover of the final gear drive. The cover is attached by bolts onto the sides. -
Page 38: Chains
Operator Manual - Spider ILD02 SG 11.13 CHAINS STEERING CHAIN Check the wear and tension of the chain and the tensioning devices. The chain can by tightened by rotating the steering motor bracket after loosening two attachments bolts (see the figure). -
Page 39: Mowing Blades
Operator Manual - Spider ILD02 SG 11.15 MOWING BLADES Changing the mowing blades Check the state of cutting blades in regular intervals Raise the mowing device to the transport position. Stop the engine, switch off the RC and push the The blades: emergency button on the body of the mower. -
Page 40: Changing The Wheel
Operator Manual - Spider ILD02 SG 11.16 CHANGING THE WHEEL Change the wheels on a level, firm surface Turn the wheel so that the tightening nuts are accessible from the outside Stop the engine, remove the key from the ignition Secure the machine against movement. -
Page 41: Lubrication
Operator Manual - Spider ILD02 SG 11.19 LUBRICATION Use adequate amount of lubricant on parts, which are to be lubricated. Excessive lubricant tends to drop down and pollute both the machine and the environment. Insufficient amount requires frequent lubrications. Chain Spray Lubricant:... -
Page 42: Cleaning The Machine
Operator Manual - Spider ILD02 SG 11.20 CLEANING THE MACHINE Cleaning the whole machine by a power washer or similar is not recommended. Water under pressure may penetrate inside electrical parts, carburettor, air filter and cause malfunction. Wipe other parts with tissue or brush. -
Page 43: Technical Plate
11.24 TOOLS Spider ILD02 is equipped with a basic set of tools, which allow regular maintenance and basic servicing. The tools are based under the side cover next to the control unit (see figure below). The tool roll is also equipped with a pocked for the business card of your local authorized service/dealer. -
Page 44: Auxiliary Drive Brake
Operator Manual - Spider ILD02 SG 11.25 AUXILIARY DRIVE BRAKE The machine is equipped with an auxiliary drive brake, which brakes the wheels in situations, when the pressure in the hydraulic circuit drops (engine shut down, air in the hydraulic circuit, result of using the “Emergency stop”... -
Page 45: Troubleshooting
Operator Manual - Spider ILD02 SG 12 TROUBLESHOOTING Problem Possible cause Correction Nothing appears on the display Replace the battery with a charged one RC battery is exhausted when the RC is turned on Charge the battery Charge the battery... -
Page 46: Maintenance After Season
Operator Manual - Spider ILD02 SG 13 MAINTENANCE AFTER SEASON When the season is over or if the machine is not going to be used for longer than 1 month, it is advisable to prepare it for storage. If fuel stays in a tank longer than 1 month without moving, it may create sticky sediment that can unfavourably affect the carburettor and the whole fuel system and cause engine malfunction. -
Page 47: Warranty Conditions
Operator Manual - Spider ILD02 SG 14 WARRANTY CONDITIONS This document sets out the extent, conditions and manner of exercising rights stemming from the Manufacturer’s liability for defects of the delivered Product Dvořák – svahové sekačky Ltd., registered office Dvorce 62, Havlíčkův Brod 58001, Czech Republic, ID No. - Page 48 Operator Manual - Spider ILD02 SG 11. In the event of a change in owner, it is possible to transfer the remaining part of the Warranty period to the new owner if the Manufacturer is requested to do so. The new owner confirms that they have taken receipt of the instruction manual at the same time as the Product as well as the Warranty conditions and that they agree with these.
-
Page 49: Bill Of Delivery
Operator Manual - Spider ILD02 SG 15 BILL OF DELIVERY Combined delivery note ------------------------------------------------------------------------------------------------- Copy for Dealer (Part 1) DELIVERY NOTE Date: Confirmation: I have read the instructions for users and the safety instructions set out in Product: the operating instructions for the Product and Spider ILD02 SG understood them. - Page 50 Operator Manual - Spider ILD02 SG 50 / 51 rev. 01-01-04-2011...
-
Page 51: Service Records
Operator Manual - Spider ILD02 SG 16 SERVICE RECORDS SPIDER ILD02 SG Warranty Inspection after 200 Operating Hours Date: ____________ Inspection description: _______________________________________________________________ _______________________________________________________________ _______________________________________________________________ Defects found: _______________________________________________________________ _______________________________________________________________ _______________________________________________________________ Parts changed: Part number Part description Service shop signature: Customer signature:...
Need help?
Do you have a question about the ILD02 SG and is the answer not in the manual?
Questions and answers