Samsung CFTD2085X/SMS Service Manual page 22

Disassembly and Reassembly
3-3-11 Lever Tension Ass'y,
Band Brake Ass'y Removal
1) Remove the Lever Brake S Ass'y (Refer to Fig
3-17).
2) Remove the Spring Tension Lever Œ.
3) Rotate stopper of Main Base in the direction of
arrow "A".
4) Lift the Lever Tension Ass'y ´ & Band brake
Ass'y ˇ.
Note :
1) When replacing the Lever Tension Ass'y ´, be
sure to apply Grease on the post,
2) Take care not to touch stain on the felt side, and
not to be folder and broken Band brake Ass'y
3) After Lever Tension Ass'y seated, Rotate stop-
per of Main Base to the Mark[B].
ΠSPRING TENTION LEVER
STOPPER
"A"
MARK[B]
Fig. 3-16 Lever Tension Ass'y,
Band Brake Ass'y Removal
3-12
ˇ BAND BRAKE ASS`Y
´ LEVER TENTION ASS`Y
3-3-12 Lever Brake S, T Ass'y Removal
1) Release the Hook [A] and the Hook [B], [C] in
the direction of arrow as shown in Fig 3-17.
2) Lift the Lever S, T Brake Ass'y Œ, ´ with
spring brake ˇ.
Assembly :
1)Assembly the Lever S Brake Ass'y Πon the
Main Base.
2)Assembly the Lever T Brake Ass'y ´ with
spring brake ˇ.
Note : Take extreme care not to be folded and
transformed Spring Brake at removing or rein-
stalling.
ΠLEVER S BRAKE ASS`Y
Fig. 3-17 Lever Brake S, T Ass'y Removal
HOOK(A)
ˇ SPRING BRAKE
HOOK(C)
HOOK(B)
´ LEVER T BRAKE ASS`Y
Samsung Electronics