Ribbon - Toshiba B-SA4T Series Product Description

2. SUPPLY SPECIFICATIONS

2.2 Ribbon

(1) Specification of Ribbon
No. Item
1 Shape
2 Width
3 Max. length
4 Max. outer diameter
5 Back treatment
6 Core
7 Leader tape
8 End tape
9 Winding method
NOTES: 1. To ensure print quality and print head life use only TOSHIBA TEC specified ribbons.
2. Too much difference in width between media and ribbon may cause ribbon wrinkles. To avoid
ribbon wrinkles use a ribbon for proper media width shown in the above table. Do not use a
ribbon that is narrower than media.
.
Ribbon width
Proper media width
(2) Ribbon Core Shape
NOTE: When purchasing ribbon locally, they must meet the above size. There may be TOSHIBA TEC-
approved ribbons which do not fall within the above size, however, they have no functional problem.
Spool type
60 to 110 mm (Recommended width is 60, 90, and 110 mm)
450 m (within ø 75 mm)
ø 75 mm
Coated
Material Cardboard
Shape See the following figures.
Polyester film (Opaque), 260 ± 5 mm long
None
The ink side faces outside of ribbon winding
60 mm
25 to 55 mm
Max. 118 –0, -0.5mm
Specification
90 mm
55 to 85 mm 85 to 105mm
2- 5
110 mm
25.8 ±0.2 mm
EO10-33016A
2.2 Ribbon