March 1997
Remote Programming Interface
The Remote Programming Interface (RAI) is a daughter board modem installed on the SCC card. With the RAI
card installed a remote PC with modem can gain access to the system and adjust its programming.
1
Switch off the DBS and remove the front cover.
2
Withdraw the SCC card and unclip its top cover.
3
Plug the RAI card into connectors CN2 and CN3. Ensure that the pins are not damaged when doing this.
4
Replace the SCC card cover and re-install the SCC card.
5
Replace the system covers and switch the DBS on.
Panasonic Digital Business System - Installation Manual
Figure 24 - RAI Card Installation
29
Issue 5