Getting to Know HUAWEI Mobile WiFi Connection Scenario A Wi-Fi device can be connected to the Internet through the Mobile WiFi. The actual connection procedure depends on the operating system of the Wi-Fi device. The connection scenario illustrated here is for your reference.
Appearance Item Screen WPS button Press it twice consecutively to display the SSID and wireless network key. Press and hold it until a WPS activation animation is displayed to enable the WPS function. Power/Wi-Fi button SIM card slot Strap hole USB port Reset button...
Page 4
Screen Item Signal strength Network Wi-Fi enabled Number of devices connected Internet connection status New messages Number of new messages 0.00 00:00 Battery level International roaming state Traffic data Connection duration A: Auto mode ...
Charging the Battery Charge your Mobile WiFi the first time you use it or if it has not been used for a long time. Method 1: Using the charge Caution: Only use chargers compatible with the Mobile WiFi and provided by a designated manufacturer.
Page 9
Method 2: Connecting to a PC for charging Connect the Mobile WiFi to a PC using a compatible data cable.
Step2: Establish a Wi-Fi Connection (Take a computer with Windows XP operating system as an example) Make sure that the Wi-Fi is enabled. Select Start > Control Panel > Network Connections > Wireless Network Connection. Note: To set up a Wi-Fi connection, the PC must have a wireless network adapter installed. If Wireless Network Connection is displayed, a wireless network adapter is available.
Step3: Access the Internet After you establish a Wi-Fi connection successfully, you can access the Internet using the following modes. Caution: Please select a proper Internet connection mode based on your service expense. For example, if you are subscribed to the time-based network service, you are recommended to select Manual mode.
Note: Launch the web management page to select the mode for accessing the Internet. You can choose whether to enable the Mobile WiFi to connect to the Internet automatically even while you are roaming. If this function is disabled, the Mobile WiFi automatically disconnects from the Internet while you are roaming.
Daily Use Power Saving Mode If no operation is performed on the Mobile WiFi within a preset period, the screen turns off. Press any key to light up the screen. If the Mobile WiFi is powered by the battery only, choose whether to enable the Mobile WiFi to turn off Wi-Fi automatically.
Page 17
Example 1: Wi-Fi Connection to Game Machine (Sony PSP) Turn on the PSP WLAN switch. Select Settings > Network Settings. Select Infrastructure Mode to connect to your local Wi-Fi access point. Select New Connection to specify an easy to remember connection name. Select Scan to detect all networks within range.
Page 18
Note: Press twice consecutively to display the current SSID and wireless network key on the screen. Press the ► button of your game machine to continue, and then press the X button to save the settings. Select Test Connection to check the connection.
Example 2: Wi-Fi Connection to a Smart Phone (iPhone) Select Settings > Wi-Fi, and then turn on Wi-Fi. Automatically detect the networks in range and display the access point list. Select a network indicated by the SSID of the Mobile WiFi. If necessary, enter a password and tap Join.
Tips If the Mobile WiFi is placed in an environment with poor ventilation, it may overheat after extended use. When the Mobile WiFi overheats, it will switch off and disconnect from the network automatically to protect itself. If this happens, place the Mobile WiFi in a well-ventilated location, then restart the Mobile WiFi.
Need help?
Do you have a question about the e589 and is the answer not in the manual?
Questions and answers