Configuration; Timeserver - Hitachi WirelessIP-5000 Interface Manual

WirelessIP-5000 Web Interface Manual
・GATEWAY: The terminal's default gateway
・MACADDRESS: The terminal's MAC address
2.2

Configuration

This screen is used to perform terminal configuration. To log in to the "Configuration" screen, you must
authenticate yourself with a user name and password, as shown in Figure 2. By default, no password or
user name is set. Press the [OK] button to log in to the "Configuration" screen.(Figure 2)
※ The user name and password can be changed on the "System Setup" screen. For more information about
the "System Setup" screen, see "System Setup."
(Figure 2)
When changing configuration via web interface you have to follow this procedure:
① After changing the settings, click the [CHANGE VALUE] button to change the configuration
② Click the [SAVE FILE] button to save the configuration
③ Use the "System Setup" screen to reboot the terminal
(Caution!) Always follow the above procedure when using the WWW Management Interface to change
terminal settings. Even after you have changed the settings, they will not be active until you have saved the
configuration and rebooted the terminal.

2.2.1 TimeServer

WirelessIP-5000 - 3 -
© Copyright2004, Hitachi Cable and ABP Technology, All rights reserved
Keison Products www.keison.co.uk sales@keison.co.uk Tel: +44 (0)1245 600560 Fax: +44 (0)1245 600030