Perform Test Printing With The Normal Test Pattern - MIMAKI JV33-130 Operation Manual

Perform test printing with the normal test pattern

Check before the
test printing
1
In the local mode,
press the
• Press
The deployment direction changed here returns to the direction set in P.3-36 after test
printing.
• When performing test printing after changing the deployment direction from "SCAN DIR."
to "FEED DIR.", the line will be fed to the position of the first test printing.
• For the detail of the deployment direction of the test printing, see P.3-36.
2
Press the
• This machine starts printing the test pattern.
• After performing test printing, this machine returns
to LOCAL mode.
3
Check the printed test pattern.
• Finish the operations when it is in normal.
• Execute the head cleaning when it is in abnormal. (
Normal pattern
• If a media has been set.
• If the head gap has been adjusted.
key.
and key to change the test pattern deployment direction.
key.
Nozzles are dirty
P.2-6 • If the origin position has been set.
P.2-6
T E S T D R AW
( F E E D D I R . )
* * T E S T D R AW * *
< L OC A L . 1 >
P.2-25)
Clogged with ink
Abnormal pattern
Test printing
< E N T >
2
[ # 0 1 ]
w i d t h : * * * * mm
2-21