Page 1 OW NER’S MANUAL ASSEMBLY & SAFETY Page No.  User instructions  Trailer component diagram  Main panels assembly  Fasten basket on panels  Attaching top cover  Installing and removing wheels  Attaching reflectors or LED light  Attaching flag ...
Page 2 USER INST RUCTIONS PLEASE READ THE INSTRUCTION MANUAL AND ALL SAFETY WARNINGS CAREFULLY BEFORE USING YOUR TRAILER. I M P O R TA N T T H E CA R G O T R A ILE R IS N O T F O R H U M A N T R A N S P O R T WARNING ...
Page 3 EXPLODED VIEW FOR CLARIFICATION ONLY BILL OF PARTS NUMBER NAME QUANTITY NUMBER NAME QUANTITY Base Tube Basket Fixing Side Panel Basket Front/Rear Panel Top Cover Hitch Arm Reflector Hitch Clamp Spoke Reflector Wheel Assembly Flag Locking Clip Safety Strap PE Board Safety Clip...
Page 4 MAIN PANELS ASSEMBLY Remove trailer and all components from carton. While trailer is still in folded position, lift both side panels to an upright position and connect the panels with the safety pins. NOTE: Ensure that the safety pins are secured with the wrap spring clip. FASTEN BASKET ON PANELS Fasten the basket with Velcro on the top of the panels.
Page 5 INSTALLING AND REMOVING WHEELS Place the wheel hub on the axle by simply pushing in the wheel until it snaps in place, so the wheel can not be removed. Push in all the way so that the wheel cannot be pushed further. After both wheels are assembled/attached, pull on the wheels to ensure they cannot be removed.
Page 6 HITCH ARM ASSEMBLY Lift front of trailer up. Remove the locking pin from back hole. Pull hitch arm out and secure it with the locking pin. Make sure that the locking pin is engaged and safety clip is closed on pin. IMPORTANT Do not use the trailer without proper installation of the locking pin.

This manual is also suitable for:

Cargo trailer