Table of Contents
Advertisement
Congratulations on purchasing a DaVinci product. This product will provide many years of service if you
adhere to the following guidelines for assembly, maintenance and operation. This product is for residential
use only. Any institutional use is strictly prohibited.
Please be sure to follow the instructions for proper assembly. Use a Phillips head screwdriver for assem-
bling the crib in addition to the Allen wrench included in the hardware box. Do not use power screwdrivers.
All of our products are made from natural woods. Please understand that natural woods have color
variations which are the result of nature and not defects in workmanship.
DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND HARD-
WARE. YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLISTIC
VARIATIONS.
WARNING!
!
READ ALL INSTRUCTIONS BEFORE USE OF THE CHANGING TABLE, ADD-ON
CHANGING UNIT, OR CONTOURED CHANGING PAD.
!!PLEASE READ!!
Assembly of this furniture is easier with two people. Assemble furniture on debris free carpets or on the enclosed
foam sheets to prevent scratching of finish. Using any power tools to assemble this furniture may potentially strip
the wood. DO NOT OVERTIGHTEN SCREWS. DO NOT USE THE CHANGING TABLE IF IT IS DAMAGED OR
BROKEN.
Revised 08-2010
Kalani Crib + Changer Combo (M5591) -
Assembly and Operation Manual
page 1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for DaVinci Kalani Crib + Changer Combo (M5591)
Summary of Contents for DaVinci Kalani Crib + Changer Combo (M5591)
- Page 1 Kalani Crib + Changer Combo (M5591) - Assembly and Operation Manual Congratulations on purchasing a DaVinci product. This product will provide many years of service if you adhere to the following guidelines for assembly, maintenance and operation. This product is for residential use only.
- Page 2 PARTS A. Back Panel B. Front Panel F-1. Right C. Right Side Panel E. Center Panel D. Left Side Panel Back Post H. Crib Top Panel X 2 J. Post Bracket X 4 F-2. Left F-3. Back G-1. Right G-2. Left G-3.
- Page 3 Q. Drawer Bottom P. Drawer R. Dresser Back S. Dresser Back T. Dresser Front Board X 3 Back X 3 Top Panel Panel Top Bar Tools Needed U. Dresser Center V. Dresser Middle W. Dresser Top X. Dresser Bottom (not included) Bar X 2 Bar X 2 Bar X 2...
- Page 4 STEP 1. Assemble all drawers N. Right Drawer Panel O. Left Drawer Panel H19. Left Drawer Glide H17. Right Drawer Glide page 4...
- Page 5 STEP 2. Attach posts to center panel F-1. Right Back Post G-1. Right Front Post STE P 3. Attach panel glides and metal pins to center and right side panel H18. Left Panel Glide H16. Right Panel Glide page 5...
- Page 6 STEP 4. Attach dresser panels and bars to right side panel C. Right Side Panel STEP 5. Attach dresser bars to right side panel page 6...
- Page 7 STEP 6. Attach dresser boards to the dresser STEP 7. Attach center panel to the dresser page 7...
- Page 8 STEP 8. Attach posts to left side panel F-2. Left Back Post G-2. Left front post STEP 9. Attach post brackets to posts page 8...
- Page 9 STEP 10. Attach the crib top panel and back panel STEP 11. Attach spring frame page 9...
- Page 10 STEP 12. Attach the crib top panel and front panel STEP 13. Place dresser shelves into the dresser page 10...
- Page 11 STEP 14. Slide drawers to the dresser STEP 15. Place the contour changer pad onto the changer Use the specific changing pads that conform to ASTM F2388-08a Use changing pads no greater than 15-3/8"(W) x 27-3/4"(L) x 5"(H). This products is not intended to be used as a changing table without a changing pad (no greater than 15-3/8"(W) x 27-3/4"(L) x 5"(H)).
- Page 12 KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE. The recommended maximum weight of the occupant is 30 lbs on changing table. Be sure to tighten the cross bar screws now that you have installed to the stationary side. Recheck all screws and bolts to be sure they are fastened securely.
- Page 13 finish edges before and after assembly and frequently during use. DO NOT use crib if any parts are missing, damaged or broken. Contact DaVinci for replacement specified for children’s products. If you parts and instructional literature if needed. DO NOT substitute parts.
- Page 14 States do not allow limitation on how long and using the changing table. an implied warranty lasts. • Only use the pad provided by DaVinci. • The maximum weight of the child for which the chang- ing table is intended is 30 lbs.
- Page 15 Toddler bed Conversion - Assembly Instructions * All of the parts and hardware you will need is supplied with the crib at the time of purchase. STEP 1. STEP 2. Unscrew the Allen head bolts and Move the spring frame to the lowest level. remove the front panel assembly.
- Page 16 Full size bed Conversion - Assembly Instructions * For all 4 in 1 cribs, please contact a retailer to order your full size adult wooden bed rails for your full size bed conversion. 3” Phillips Head Bolt X 8 Barrel Nut X 8 STEP 1.
Need help?
Do you have a question about the Kalani Crib + Changer Combo (M5591) and is the answer not in the manual?
Questions and answers
Hello, The board for the top of the changing table is damaged, are you able to mail me a replacement?