Open Network Option; My Function; Traverse Function - Toshiba Tosvert VF-AS1 Instruction Manual

6.39.2 Open network option

 ~ 
 ~ 
 ~ 









 ~ 
 ~ 




 , 
6

 For details, refer to Instruction Manual (E6581281, E6581343) specified in Section 6.42.
6.40

My function

 : Input function target 11~  : My function selection
 For details, refer to Instruction Manual (E6581335) specified in Section 6.42.
6.41

Traverse function




 For details, refer to Instruction Manual (E6581337) specified in Section 6.42.
: For Ethernet Communication option
: MAC address data 1~6
: Device name data 1~8
: Address monitor (Modbus plus)
: Command selection (Modbus plus)
: Number of command (Modbus plus)
: Number of monitors (Modbus plus)
: Command station (Modbus plus)
: Baud rate (Ethernet)
: Baud rate monitor right port (Ethernet)
: Baud rate monitor left port (Ethernet)
: - (Reservation)
: Communication option settings 1 to 7
: Communication option settings 8 to 13
: Disconnection detection extended time
: Disconnection detection extended time
: Inverter operation at disconnection
: Preset speed operation selection
: Selection of monitoring
: Motor pairs of poles for communication
: Traverse selection
: Traverse acceleration time
: Traverse deceleration time

: Traverse step

: Traverse jump step
F-88
E6581442