Set Up And Connections - JVC 0509GLT-NF-MT Instructions Manual

Set up and connections

Power lamp
ON : Lit (Blue)
OFF : Unlit
Power lamp lights
while the TV is on.
• "Power Lamp" (P. 11)
Remote control
sensor / Eco Sensor
Care when setting
■ Power requirements
• Connect the power cord only to a 110-240V, 50/60Hz AC outlet.
■ When attaching the TV to the wall, use the optional JVC wall
mounting unit
• Consult a qualifi ed technician.
• JVC assumes no responsibility for damage due to improper mounting.
• LT-32Z49 : 200 mm x 200 mm mount which conforms to VESA standards.
• LT-42Z49 : 400 mm x 200 mm mount which conforms to VESA standards.
■ Installation requirements
• To avoid overheating, ensure the unit has ample room.
200mm
150mm 50mm 150mm 50mm
4
Switch between TV / VIDEO
TV/VIDEO
devices
MENU/OK
Display on-screen menu / set
Change channel / Page /
CHANNEL
Hyper Scan Function (P. 3)
Volume / Adjust
VOLUME
Power On / Off
To Headphone (P. 5)
• To prevent the TV from falling, thread
the belt through the hole on the back of
the stand and secure it to the TV rack.
Hole for belt
(under the stand)
Screw for attach
the belt to the
stand (provided)
Screw (not provided) Belt (provided)
Connect an aerial and VCR / DVD Player
VCR (DVD Player)
• After all the connections have been made, insert the plug into an
AC outlet.
Stand Assembly
- Insert the stand into the panel at the position where the screw
holes are, and fasten the screws.
- If you have any problem with assembly, please contact a retailer or
a dealership.
Note: 4 screws included.
AERIAL
OR