JVC HM-DH40000U Instructions Manual page 65

1
Make connections
Connection with the camcorder
A
Connect a DV cable between the camcorder's
DV connector and your VCR's DV IN connector.
Connection with the VCR
B
Connect an i.LINK cable between the playback
VCR's i.LINK input/output connector and the
recording VCR's i.LINK input/output connector.
NOTES:
Depending on the devices equipped with the i.LINK
connector which is connected to the VCR, picture
noise on this VCR may differ from the noise on the
connected devices. It is caused by the difference of
the data processing method.
Connection with certain product(s) may not be
supported. ( "ATTENTION" on the back cover.)
2
Load a cassette
Insert the cassette to be recorded on into this
VCR (for recording).
3
Select input location on this VCR
On the front panel:
Press CHANNEL +/– to select "I-1 etc.".
On the Remote:
Press TV/VCR CH +/– to select "I-1 etc.".
4
Set recording speed
Press REC SPEED to set the recording speed.
For more details, refer to "About Recording
Speed" below.
About Recording Speed
Input Source
(Playback device)
D-VHS
i.Link/
DV camcorder
DV input
Others
* Auto mode: The recording speed will be selected automatically according to the amount of data input (the transfer rate) from
the i.LINK connector.
NOTES:
When dubbing using the i.LINK connector, set the recording speed on the recording VCR to the same speed as the source tape
on the playback VCR.
When "AUTO" is selected for the recording speed, "AUTO" and the selected speed appear on the front display panel in turn.
Selectable Recording Speed
(Recording device: This VCR)
Auto (HS/STD/LS3/LS5)*, HS, STD, LS3, LS5
HS, STD, LS3, LS5
Auto (HS/STD)*, HS
5
Start playback
Press PLAY ( 3 ) on the connected device.
NOTE:
If the connected device is equipped with a
superimpose/OSD disable feature then set it to "OFF"
before starting playback.
6
Start recording
On the front panel:
Press REC ( ¶ ).
On the Remote:
Press REC ( ¶ ) and PLAY ( 3 ) at the same time.
NOTE:
If "108 REC BY HS MODE" appears on the TV screen, refer to
"Error Codes and Messages" on page 77.
Do not connect this VCR to the PC with the i.LINK
cable. The operation is not guaranteed.
65
EN