JVC HR-XVC29SU Instructions Manual page 43

Repeat Playback
You can repeat playback as you like according to the type of
disc.
DVD VIDEO: during playback
Audio CD: during playback or in stop mode
Video CD/SVCD: in stop mode or during playback with PBC
deactivated
1
Access the repeat mode.
Press REPEAT.
Repeat mode is displayed on the TV.
2
Select the repeat mode.
Press REPEAT repeatedly to select the desired repeat
mode.
DVD VIDEO
CHAPTER]TITLE]OFF](Back to the beginning)
CHAPTER
:
TITLE
:
OFF:
Video CD/SVCD/CD
TRACK]ALL]OFF](Back to the beginning)
TRACK:
ALL:
OFF:
The pop-up window disappears if no operation is done for
about 5 seconds.
To cancel Repeat Playback
Press REPEAT repeatedly until "OFF" appears on the TV
screen.
NOTES:
Repeat Playback is not possible with a Video CD and SVCD
with PBC function.
Repeat Playback may not work properly depending on the
type of disc being used.
You cannot select A-B Repeat Playback by pressing REPEAT.
The current chapter is played back
repeatedly.
The current title is played back
repeatedly.
Each title and chapter is played
back once.
The current track is played back
repeatedly.
All tracks are played back
repeatedly.
Each track is played back once.
A-B Repeat Playback
You can repeat the desired part.
1
Access the on-screen bar.
Press ON SCREEN twice. The on-screen bar appears on
the TV screen.
2
Select menu item.
Press w e to hightlight
The following pop-up window appears under the selected
item.
3
Select the repeat mode.
Press rt repeatedly to select "A-B."
4
Select the start point.
Press ENTER at the beginning of the part you want to
repeat (point A).
The following display appears in the on-screen bar.
5
Select the end point
Press ENTER at the end of the part you want to repeat
(point B).
A-B Repeat Playback starts. The selected part of the disc
(between point A and B) is played repeatedly.
To cancel A-B Repeat Playback
Repeat from step 1, select "OFF" in step 3, then press
ENTER.
To clear the on-screen bar
Press ON SCREEN.
NOTE:
The points A and B must be set in the same title or track.
43
EN
, then press ENTER.