Creating And Verifying The Mount Directories - HP XP48 Configuration Manual

Creating and verifying the mount directories

Caution
Example
Example
Installation
Do not create mount directories for multiplatform devices.
To create and verify the mount directories:
1. Create a mount directory by using the mkdir command.
For example, to create a mount directory for logical unit 0 on the disk
array, partition c, enter:
# mkdir HP5700_LU0c
2. Verify the new mount directories by using the ls –d command.
# ls -d /HP5700*
drwxr-xr-x 2 root
drwxr-xr-x 2 root
drwxr-xr-x 2 root
drwxr-xr-x 2 root
drwxr-xr-x 2 root
drwxr-xr-x 2 root
drwxr-xr-x 2 root
drwxr-xr-x 2 root
drwxr-xr-x 2 root
drwxr-xr-x 2 root
drwxr-xr-x 2 root
drwxr-xr-x 2 root
drwxr-xr-x 2 root
:
:
#
3. Repeat steps 1 and 2 for each device on the disk array.
sys 9 May 22 13:53 /disk13
sys 9 Sep 10 1996 /disk4
sys 9 May 22 13:46 /disk412
sys 9 May 22 13:49 /disk413
sys 9 May 22 13:55 /disk48
sys 9 Sep 11 1996 /disk5
sys 9 Oct 10 1996 /disk52
sys 9 Oct 7 1996 /disk53
sys 9 Oct 7 1996 /disk531
sys 9 Sep 13 1996 /disk54
sys 9 Sep 13 1996 /disk541
sys 9 Sep 13 1996 /disk542
sys 9 Sep 18 1996 /disk543
35