Led Light Key; Red Light - SkyBell WiFi Video Doorbell Installation & Starting Manual

and answer the call to confirm it is
working properly.
5. If you need to adjust the camera, place
the security tool into the small hole
below the camera. Rotate the tool to
position the camera with your finger
and the security tool.
6. In the app, your new SkyBell device
will appear in the home screen of the
app. You can tap that device to adjust
its individual settings.
*Red Light - If the LED light is a solid red
at any time after a successful sync, this
means the device does not have WiFi
connection and/or internet connection.
Please visit
to troubleshoot.

LED Light Key

1. Red (Solid) = Device has power but no
Wi-Fi or internet connection
2. Red (Blinking Fast) = Device is in setup mode
3. Red (Blinking Slow) = Device has direct power
and battery is charging
4. Green (Solid) = Device has power, Wi-Fi and
server connection (normal)
5. Green (Blinking Fast) = Device has power and
Wi-Fi but no server/internet connection
6. Green (Blinking Slow) = Device has power and
Wi-Fi but is connecting to server
13
www.SkyBell.com/support