Initial Settings; Auto Set Up - JVC 0504CSH-ID-VT Instructions Manual

10
EN

Auto Set Up

Auto Channel Set/Auto Clock Set/
Auto Guide Program Number Set
After the 1 button on the unit or remote control is pressed
for the first time to power on the unit, by simply selecting
your country*, the Auto Set Up function sets the tuner
channels, clock** and Guide Program numbers
automatically.
* If you live in Belgium (BELGIUM) or Switzerland (SUISSE), you also
need to select your language.
** If you live in Hungary (MAGYARORSZÁG), Czech Republic (
REPUBLIKA), Poland (POLSKA) or other countries in Eastern Europe
(OTHER EASTERN EUROPE), set the clock manually.
Before starting, make sure of the following:
The TV aerial cable should be connected to the unit.
The unit's mains power cord should be connected to a
mains outlet.
The TV should be set to its AV mode (with AV connection
pg. 9) or UHF channel 36 (with RF connection
pg. 9).
Slide the TV/VCR/DVD switch to the right.
A
Turn on the unit.
Press 1 on the unit or remote control. The Country Set
display appears on the TV screen.
NOTE:
If you have connected your TV to
the unit with RF connection and
the on-screen display appearing
on UHF channel 36 looks
distorted, perform "Video
Channel Set" on page 73.
ESKÁ
B
C
Select your country.
Press rt to move the
highlight bar (pointer) to your
country's name.
(Example) DEUTSCHLAND is
selected.
NOTES:
If you have selected BELGIUM or SUISSE, go to step C.
If you have selected MAGYARORSZÁG, CESKÁ REPUBLIKA,
POLSKA or OTHER EASTERN EUROPE, press OK. The Clock
Set screen appears. Set the clock manually (
go to step D.
If you have selected any other country name, go to step D.
C
Select the language.
Press OK. The Language Set
display appears on the TV
screen.
Press rt to move the
highlight bar (pointer) to the
language of your choice.
(Example) DEUTSCH is selected.
NOTE:
The selected language is only available on the screen for VHS
deck.
Set manually the on-screen language for the DVD deck.
( pg. 16)

INITIAL SETTINGS

pg. 74), then