TOWING THE
VEHICLE
Procedure for having your vehicle towed
or for towing another vehicle using a re-
movable towing eye.
Access to the tools
The towing eye is installed in a holder at
the bottom of the boot under the floor.
To gain access to it:
place the vehicle in "coupé" configu-
ration,
open the boot,
raise the floor,
remove the towing eye from the
holder.
Towing your vehicle
On the front bumper, unclip the co-
ver by pressing at the bottom.
Screw the towing eye in fully.
Install the towbar.
Switch on the hazard warning lights
on the towed vehicle.
i
Place the gear lever in neutral
(position N on the automatic
gearbox).
PRACTICAL INFORMATION
Towing another vehicle
On the rear bumper, unclip the cover
by pressing at the bottom.
Screw the towing eye in fully.
Install the towbar.
Switch on the hazard warning lights
on the towed vehicle.
!
When towing with all four wheels
on the ground, always use a tow-
bar.
When towing with only two wheels
on the ground, always use profes-
sional lifting equipment.
When towing with the engine off,
there is no longer any braking or
steering assistance.
9
135
Need help?
Do you have a question about the 207cc and is the answer not in the manual?
Questions and answers