Table of Contents
Advertisement
TIMER RECORDING ON HDD/DVD DECK
46
EN
VCR Plus+ Timer Programming
You can program this unit to timer record as many as 32 programs.
With the VCR Plus+ system, timer programming is greatly
simplified because each TV program has a corresponding code
number which your unit is able to recognize.
You can use the remote control to enter the PlusCode number.
Make sure that the unit's built-in clock is set properly.
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/CABLE/DBS/DVD switch to DVD.
0 – 9
ENTER
DISPLAY
1
Load a recordable disc if recording to DVD.
2
Press PROG to access the program top screen.
3
Press selection keys to select AVCR Plus+ PR.B, then press
ENTER.
When APROGRAM FULL DELETE UNWANTED TIMER
PROGRAMSB appears on the TV screen, you need to cancel
some of the reserved programs. (A pg. 49)
4
Press the number keys to
enter the PlusCode number of
a program you wish to record.
OR
Press selection keys to select
the desired number key on the
screen, then press ENTER.
Repeat to enter all required
numbers.
If you have made a mistake, press selection keys to select
ADELETEB or ADELETE ALLB, then press ENTER and input the
correct number before you press ENTER again.
5
Press selection keys to select ARECORD TOB, then press
ENTER. Press selection keys to select the desired recording
deck, then press ENTER.
6
Press selection keys to select ACONFIRMB, then press
ENTER.
If the number you entered is invalid, APLUSCODE NO. ERROR
CONFIRM PLUSCODE NO. THEN RETRYB appears on the TV
screen. Input a valid PlusCode number.
If AGUIDE PROGRAM IS NOT SET SET GUIDE PROGRAM
THEN RETRYB appears on the TV screen, set Guide Channel
Numbers manually. (A pg. 73)
CABLE/DBS
TV
DVD
PROG
Selection Keys
FGDE
RETURN
1
1
3
3
PROGRAM > VCR Plus+ PR. (1/2)
2
2
2
PLUS CODE NO.
1 2 3 4
1
2
3
SELECT WITH @
THEN PRESS [ENTER]
4
5
6
PRESS [PROG] TO EXIT
7
8
9
0
DELETE
DELETE ALL
RECORD TO
DVD
PROG
ENTER
CONFIRM
SELECT
EXIT
7
The PlusCode number you entered and the matching timer
recording information are displayed on the TV screen. Check
the program data.
To cancel this setting, press RETURN.
IMPORTANT:
Make sure the channel position number you wish to record is
displayed; if not, see AChanging VCR Plus+ SettingB (A pg. 73)
and set the Guide Channel number correctly.
8
Press selection keys to select the desired recording option as
required. Press selection keys to select the desired setting,
then press ENTER.
AINPUT NAMEB (A pg. 51, AModify Title NameB)
ACATEGORYB (A pg. 52, AModify CategoryB)
AWEEKLY/DAILYB (A pg. 47, AWeekly/Daily RecordingB)
AREC MODEB (A pg. 34, ARecording ModeB)
9
Press selection keys to select AOKB, then press ENTER to
access the Program Confirmation screen.
10
Press selection keys to select AEXITB, then press ENTER to
complete timer programming.
To program another timer, press D E to select ACONTINUEB,
then press ENTER.
If APROGRAM OVERLAPPEDB appears on the TV screen,
delete or modify the programs.
NOTES:
There may be cases that the VCR Plus+ Timer Programming
function prolongs the stop time of the programming.
When two successive programs are recorded on a DVD-RW disc
with the VCR Plus+ Timer Programming function, the beginning
of the second one may be left off the recording.
If the copy limited program is received during timer recording, the
unit enters Record Pause mode. Recording starts again if it is
switched to a recordable broadcast during the time you
programmed.
IMPORTANT:
If you have moved to a different area or if a broadcasting
station's channel number has been changed, the wrong channel
number will be displayed on the VCR Plus+ program screen in
step 7. When this happens, set the correct Guide Channel
number for that station. (A pg. 73, AChanging VCR Plus+
SettingB)
Advertisement
Table of Contents
