Erasing The Last Title; Disc Repair Feature - JVC BD-X201MS Instructions Manual

Erasing the Last Title

Only the last title of an unfinalized disc that is recorded using this unit will be erased.
DISC MENU screen
DISC MENU
MENU
FINALIZE
CANCEL DISC FINALIZATION
AUTO FINALIZE
AUTO CANCEL DISC FINALIZ.
( QUICK )
DISC ERASE
DISC ERASE
( FULL )
LAST TITLE ERASE

Disc Repair Feature

When the power supply is cut off during recording or other operations on this unit, there is a feature to repair the disc.
After the power supply is cut off during recording or other operations, the disc repair (RESTORE) will automatically start when the
power is supplied again.
CAUTIONS
• Do not switch off or plug out the power cord during disc repair.
• The repair might not be possible depending on the disc.
1.
Insert the DVD-R/DVD-RW/DVD+R/DVD+RW.
2.
Press the SET UP button to display the Setup Menu.
3.
Use the h and g buttons to select DISC item and then press the SET
button.
• The DISC menu screen will appear.
CANCEL
4.
CANCEL
Press the h and g button, select either the LAST TITLE ERASE item,
OFF
then press the SET button.
OFF
• The setting value list box is displayed.
CANCEL
5.
CANCEL
Use the h and g buttons to select EXECUTE from the list and then
EXECUTE
press the SET button.
• The last title will be erased.
Note
In the case of DVD-R/DVD+R, erasing a title will not create more disc space.
CAUTION
Under no circumstances should the power be turned off or the power cord dis-
connected while data is being erased.
Recording
E-41