Flash code
Fault
8
Motor voltage error
9
Miscellaneous internal fault
10
Push/freewheel mode error
10.2 Resetting the circuit breaker
WARNING!
– NEVER defeat or bypass the circuit breaker.
– ONLY replace with a circuit breaker of the same
rating.
– Key must be removed from ignition before resetting
circuit breaker.
– Resetting the circuit breaker may be needed if the
scooter does not turn on and the reset button has
popped out about 6 mm.
1576371-B
Consequence for the
scooter
Comments
•
Stops driving
•
Stops driving
•
Stops moving
1.
To reset, press the circuit breaker button A located on the
front of the battery box.
The motor or its cabling is defective Check the cabling for
open or short-circuited circuitry.
Contact your Invacare dealer.
The scooter has exceeded the permissible maximum speed
during pushing or freewheeling. Switch the electronics system
off and on again.
Troubleshooting
39
Need help?
Do you have a question about the Colibri and is the answer not in the manual?