Connecting to the LAN
Connecting to the LAN
Computer
+
Authoring software
*: Content can be distributed to up to 20 media players.
Media player network setup
Media player network setup
Installing and running the authoring software
Installing and running the authoring software
See pages 3 and 4 in the "USB Memory Procedures" section.
LAN
Router or Hub
Media player
DVI cable
Media player
DVI cable
◆Turn on the media player.
◆
Press the OSD menu button on the remote control and, when
the OSD menu is displayed, select "Network".
◆ Set the IP address and Netmask.
Sample settings
When the personal computer IP address is "192.168.0.3"
and the Netmask is "255.255.255.0"
IP address: 192.168.0.2
Netmask: 255.255.255.0
◆ Set the gateway to 192.168.0.1 (the factory setting).
◆
Disable DNS (0.0.0.0).
◆
Select "push mode" as the update method from the LAN.
◆
Click "Set".
Network Procedures
18