Fast Accel; Pedal Up Mode; Speed Cal; Code A, Code B, And Code C - Club Car XRT 800 Maintenance Service Manual

Gasoline/electric
Table of Contents

Advertisement

IQ DISPLAY MODULE (IQDM-P) PROGRAMMING

FAST ACCEL

Fast accel (fast acceleration) is an option that can be enabled or disabled. With fast accel turned on, the vehi-
cle will accelerate at a noticeably faster rate. With this feature turned off, the vehicle speed will gradually
increase, even if the accelerator is quickly pressed to the floor. Turn the feature on or off by pressing + or – on
the change value button.

PEDAL UP MODE

Three options exist for pedal up mode (motor braking). When the accelerator pedal is released, motor braking
will slow the vehicle to a speed of approximately 11 mph (17.7 km/h) when pedal up motor braking is enabled
(option 1 or 2). If pedal up motor braking is disabled (option 0), the vehicle will coast to a stop when the pedal
is released. See following NOTE.
Change the settings of the Pedal Up Mode by pressing + or – on the change value button.
NOTE: If the accelerator pedal is released when the vehicle is going down an incline, the motor braking
function will activate, slowing the vehicle to approximately 11 mph, depending on the slope of the
incline. See Speed Setting on page 29-2.
PEDAL UP MODE SETTING
0
1
2

SPEED CAL

The speed cal (speed calibration) menu item allows the user to fine tune the vehicle speed. This feature can-
not be used to increase the vehicle speed. The range for speed calibration is 0 to 10. Each time the number
is increased, the top speed will be decreased by 0.12 mph (0.2 km/h). The top vehicle speed will be deter-
mined by the speed setting menu item and the speed calibration setting. For example, if the speed setting is
set for a value of 3 (14.8 mph (23.8 km/h)), and the speed calibration is set for 5, the total top speed of the
vehicle should be approximately 14.2 mph (22.9 km/h).

CODE A, CODE B, AND CODE C

The code entries are used to place the vehicle in "private speed mode", speed setting code 4. Each vehicle
has a unique code for placing the vehicle in this mode. A vehicle programmed for "private speed mode",
speed setting 4, does not conform to ANSI Z130.1 – American National Standard for Golf Cars – Safety and
Performance Specifications because it is capable of speeds in excess of 15 mph (24.1 km/h). For more infor-
mation on this feature, contact your local Club Car distributor or dealer.
MODE
Off
Mild pedal up
Aggressive pedal up
2007-2008 XRT 800, 810 and 850 Maintenance and Service Manual
Plugging the Handset into the Vehicle
OPERATION DESCRIPTION
Pedal up motor braking is disabled
Mild pedal up motor braking
Aggressive pedal up motor braking
Page 29-3
29

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XRT 800 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Xrt 810Xrt 8502008 xrt 8002008 xrt 8102008 xrt 850

Table of Contents

Save PDF