Thermaltake TR2-550W User Manual page 6

TR2 - 550W PSU
2.2 Installation steps
To
prevent electrical shocks, please disconnect the power cord
from your existing power supply unit. TR2-550W PSU has
Voltage Selector which will change to 115V / 230V.
Installation Steps
2.2.1 Disconnect the power cord from your old power supply.
2.2.2 Follow your computer case manual and disassemble the case.
2.2.3 Disconnect all the power connectors from the motherboard
and from the peripheral devices such as case fans, hard drives,
floppy drives. etc.
2.2.4 Remove the existing power supply from your computer case
and replace it with your new Thermaltake TR2-550W PSU.
2.2.5 Connect the power connectors to the motherboard and
peripheral devices (refer to the rest of this manual to match
the various one-way key-locked connectors to the motherboard
and accessories).
2.2.6 Connect the 6-pin PCI Express connector to PCI Express
graphic card if you need.
Note: Please read the user manual supplied with your graphic card
for detail usage instructions.
2.2.7 Close the computer case.
2.2.8 Make sure your power supply switch is on "OFF" position,
and Connect the supplied power cord to your Thermaltake
TR2-550W PSU.
Thermaltake TR2 Power Supply
>> 03
ATX 12V 2.0 Version
TR2 - 550W PSU
Technology Features
12 cm Fan - High New 24(20) pin
thermal performance Main Connector
6 pin PCI- 5-pin S-ATA Connector
Express Connector
Cable Application
Total Output Connector
X1 X1
X8
24-pin 4-pin 4-pin
Main Connector +12V Power Peripheral Power
Connector Connector
+3.3 V +5 V +12 V
Max.
30 A 28 A
Load
Min.
0.5 A 0.3 A 1.0 A
Load
Peak.
Load
Load
+5% ~ -5% +5% ~ -5% +5% ~ -5%
Reg.
50 50
Ripple
V(p-p)
mV mV
Thermaltake TR2 Power Supply
ATX 12V 2.0 Version
Dual +12V Rails
Mirror Coating
Intelligent Cable
Management:
>Black cable sleeving
>Optimum air-flow
X2 X4 X2
4-pin 5-pin
Floppy Drive S-ATA Connector PCI Express
Connector
+12 V -12 V +5 VSB
1 2
14 A 15 A 0.3 A 2.0 A
1.0 A 0.0 A 0.0 A
16 A 2.5 A
+5% ~ -5% +10% ~ -10% +5% ~ -5%
100 100 100
mV mV mV
>> 08
6-pin
Connector
50
mV