Epson Serial Driver; Ac Line Tool; Power Button Prohibited Setting Tool For Windows 2000 - Epson IR-320 Technical Reference Manual

EPSON Serial Driver

Serial Driver
Serial Driver Serial Driver
When the serial port is transmitting with Windows 2000, this Driver prevents the OS from
shifting to the Standby mode, and the operation of the full-on mode can be continued.
When installing the service pack, install the serial driver again.
Install Install
Install Install
Note
Be sure an administrator installs the serial driver.
Install the serial driver using the following procedure.
1. Execute C:\backup\epserial\Epserial.exe.
2. Start serial driver Setup. The welcome screen is displayed. Click Next.
3. After installation is completed, the InstallShield Wizard Complete dialog box is displayed.
Select Yes, I want to restart my computer now, then click Finish to restart the system.
Uninstall Uninstall
Uninstall Uninstall
Uninstall the serial driver using the following procedure.
1. Open the Control Panel and select Add/Remove Programs.
2. The Add/Remove Programs dialog box is displayed. Click Change or Remove Programs to
display a list of the currently installed programs. Change/Remove will be displayed when
EPSON Serial Driver is selected. Click Change/Remove.
3. The Confirm File Deletion dialog box is displayed. Click Yes.
4. The Remove Programs From Your Computer dialog box is displayed. The uninstall process
then begins.
5. A dialog box is displayed when uninstall is completed. Click OK.

AC line tool

AC line tool AC line tool AC line tool
This tool is the utility to monitor the switching of the power of the system over to the battery
from the AC Line with Windows 2000 when the battery unit ( OI-R03 ) option is attached. For
details, see page 4-67.

Power button prohibited setting tool for windows 2000

The Power button prohibited setting tool is the tool setting the registry to prohibit the shift to the
shutdown and the stand-by mode even if the front power switch is pressed. It can prevent the
shutdown of the system even if the front power switch is pressed by mistake.
Note for using Note for using
Note Note for using for using
When Power Options of Windows are updated, the setting is cleared, so always set after
updating the Power Options.
3-10 OS and Drivers
for windows 2000 for windows 2000 for windows 2000
Rev. C