Connecting To Devices - JVC D-ILA LD-HD2KBU Instructions Manual

Installation and Connection (continued)

Connecting to Devices

Before connection, be sure to turn off both this unit and the device to be connected.
Connecting to Input Devices
● Read the manual that is supplied with the input device to be connected thoroughly.
● See below for an illustration of the devices used and method of connection.
Video Deck
S-Video
S-VIDEO VIDEO
DVI INPUT
DVI
or
HDMI
HDD/DVD Recorder
Connecting to a projector
● Read the manual that is supplied with the projector to be connected thoroughly.
● Use the DVI cable supplied with this unit. Use of a split system or optical fiber cable is recommended when using a cable
that is longer than the length of the supplied DVI cable.
● Depending on the capability of the DVI cable used, signals may attenuate or video images may become unstable.
16
Video S-Video
Cr/Pr/R Y/Gs Cb/Pb/B C-SYNC
IR LED SCREEN
Y/Pr/Pb
or
D Terminal
DVI
Digital Tuner
Y/Pr/Pb or D Terminal
Rear side of this unit
ANALOG INPUTS ANALOG OUTPUTS
PASS-THRU MONITOR RED/Pr
DVI OUTPUT
Rear side of this unit
ASS-THRU MONITOR
DVI OUTPUT
DVI Connection Cable (Supplied)
GREEN/Y BLUE/Pb H SYNC V SYNC
RS-232 OPTION RS-232 CONTROL
RED/Pr GREEN/Y BLUE/Pb H SYNC V SYNC
RS-232 OPTION RS-232 CONTROL