Headlight Sensor Sensitivity Adjustment - Fiat Ducato Owner's Manual

Speed limit (Speed Beep)
DASHBOARD
This function enables setting of the vehicle speed limit
AND CONTROLS
(km/h or mph). When this limit is exceeded the driver is
immediately alerted (see section "Warning lights and mes-
sages").
SAFETY
To set the desired speed limit, proceed as follows:
– briefly press button MODE: the display will show the
wording "Speed Beep";
STARTING
– press button
AND DRIVING
or deactivation (Off);
– if the function has been activated (On), press buttons
▲ ▼
WARNING LIGHTS or to select the required speed limit and then press
MODE to confirm;
AND MESSAGES
The speed may be set in the range from 30 to 200
NOTE.
km/h, or from 20 to 125 mph according to the previously cho-
sen unit (see "Setting the distance unit" paragraph ) described
IN AN EMERGENCY
below. The setting will increase/decrease by five units each
▲
time button
crease/decrease the setting rapidly. Complete the setting by
MAINTENANCE
briefly pressing the button when you approach the required
AND CARE
setting.
– press the MODE button briefly to return to the menu
screen or press the button for longer to return to the stan-
TECHNICAL
dard screen without memorizing.
SPECIFICATIONS
INDEX
28
▲ ▼
or to select speed limit activation (On)
▼
/ is pressed. Hold down button
To cancel the setting, proceed as follows:
– briefly press button MODE: ON flashes on the display;
– press button
– press the MODE button briefly to return to the menu
screen or press the button for longer to return to the stan-
dard screen without memorizing.

Headlight sensor sensitivity adjustment

(for versions/markets where provided)
With this function it is possible to adjust the rain headlight
sensitivity according to 3 levels.
To set the required sensitivity level proceed as follows:
– briefly press button MODE: the previously set sensitiv-
ity "level" starts flashing on the display;
– press button
– press the MODE button briefly to return to the menu
▲ ▼
screen or press the button for longer to return to the stan-
/ to in-
dard screen without memorizing.
▼
: OFF flashes on the display;
▲ ▼
or to adjust;