IP SETUP MENU
To enter the IP SETUP MENU, press the MENU button as soon as the ITP-5021D
phone is connected to the power supply.
When entering the IP setup menu, the LCD displays the following options:
>1.Infomation
2.Network
Other items not shown on screen:
3.Load & Upgrade
4.System
Once the IP SETUP MENU is displayed, you can move to each menu in the Set Up
by using the navigation buttons or the [1]-[9] dial buttons of the ITP-5021D IP
phone.
•
The UP and DOWN directions buttons in the navigation button assembly are
used to move the highlighted bar up or down to the desired option.
•
The LEFT and RIGHT buttons in the navigation button assembly are used to
move the highlighted bar left or right, to the desired option, move to a sub
menu and if a menu is at the last line, that menu option will be executed.
•
The [0]-[9] dial buttons are used to directly choose a menu, or sub menu
options.
•
The [ENTER] button in the navigation button assembly is used when saving
a modification.
•
The [MENU] button in the navigation button assembly is used to to display
the IP Setup Main Menu.
•
The [END] button in the navigation button assembly is used when canceling
or editing the modification, or existing programming.
•
The [CANCEL] button in the navigation button assembly is used to go back
to the previous screen or to delete the last digit of a displayed option value.
10
5.Server
6.Exit
Home Page
MENU STRUCTURE
The IP SETUP MENU is configured as follows:
1. INFORMATION
1.
Version
2.
Network
3.
Load Option
4.
MAC Address
2. NETWORK
1.
Mode
2.
IP
3.
Netmask
4.
Gateway
Note that items 2 to 4 are only displayed when setting Manual IP.
3. LOAD & UPGRADE
1.
Load Option
2.
Upgrade Program
3.
Upgrade Bootrom
4.
Format
4. SYSTEM
1.
Password
5. SERVER
1.
Server IP
2.
ID
3.
Password
6. EXIT
ITP-5021D
Table of Contents
11