Other Functions - Angelcare AC401 Instruction Manual

Other Functions

PARENT UNIT WITH LOW BATTERY
NURSERY UNIT WITH LOW BATTERY
HOLD FUNCTION ACTIVATED
MUTE FUNCTION ACTIVATED
LOW BATTERY WARNING
The parent unit should be recharged when
the battery icon appears empty and a short
beep is heard every 15 seconds, until the unit
shuts itself off.
When the Nursery Unit's Low Battery Indicator
(red light) is flashing, its batteries need to be
replaced. On the screen of the Parent Unit, the
empty battery icon flashes and the Nursery
Unit icon appears, to show you that it is the
batteries in the nursery unit that are low.
HOLD FUNCTION
This function allows you to put the monitor
on HOLD when you need to pick up the baby
out of his/her bed for a short period of time.
When the monitor is on HOLD, the movement
alarm will not go off and no sound is being
transmitted.
Press and hold the DOWN ARROW for 2
seconds. The symbol 'H' will appear on the
Parent Unit display.
The Parent Unit will sound a DOUBLE BEEP
every minute to confirm the monitor is still
on HOLD. Press and hold the DOWN ARROW
for 2 seconds again to deactivate the HOLD
function. The display will return to normal.
TEMPORARY MUTE FUNCTION
Press the EXIT button to mute the sound
transmission for 2 minutes.
The sound icon will flash on the Parent Unit
screen.
Only Use Rechargable Batteries in the
Parent Unit.
A short beep will also be heard every 15
seconds for about 30 minutes until the unit
shuts itself off.
Only Use Standard Alkaline Batteries in the
Nursery Unit.
TIP: When the movement alarm sounds,
press the down arrow button to put the
monitor on hold.
NOTE: Hold function does not work when
your monitor is programmed for SOUND only.
(See Temporary Mute).
To reactivate the sound transmission before
the 2 minutes have lapsed, press EXIT again.
10