Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Leba NoteSync
- Page 1 NoteSync Instructions Leba Innovation A/S...
-
Page 2: Table Of Contents
Disconnected mode ............6 The reset button ..............7 Auto function (not all versions) ..........7 Advanced functions and configuration ........8 Configuring the NoteSync ........... 8 Technical specifications and standard ........9 Test rapport ..............10 Warranty ................11... -
Page 3: Notesync
NoteSync comes in versions that support most Tablet´s. Contact LEBA Innovation for further information. USB interface NoteSync is equipped with 16 USB 2,0 ports and supports charging with up to 2,5Amp per port. NOTICE Do not touch USB ports directly. This can course the unit to reset. -
Page 4: Ventilation
Ventilation Do not cover the ventilation holes on the unit Do not cover the ventilation holes on the unit. To allow air flow through the unit t . To allow air flow through the unit the ventilation holes must be kept free from obstruction. ventilation holes must be kept free from obstruction.. -
Page 5: Connecting The Master
Connecting the master Use a USB a->b cable to connect the master. Use the USB port on the NoteSync marked “Master”. ON/OFF Button Pressing the on/off button will turn the unit on or off. This switch will light green when the unit is on. -
Page 6: Mode Button
Mode button Sync mode Pressing the mode button makes the NoteSync switch between three modes. Press the mode button and the green LED will flash. After a few seconds flashing will stop. The green LED shows that the unit is in Sync mode. -
Page 7: The Reset Button
The reset button Pressing the reset button will make the NoteSync reset on all ports Auto function (not on all versions) The Auto switch turns on/off auto mode. If Auto mode is set to off, the mode button will be active and you can manually select. -
Page 8: Advanced Functions And Configuration
Advanced functions and configuration To be able to use advanced functions and configuration of the NoteSync connect a Mac or a PC to the unit using the CONFIG port. THIS IS NOT A STANDARD USB PORT. A FDTI cable must be used – can be ordered from your dealer. -
Page 9: Technical Specifications And Standard
C (derating above 50 Secondary is SELV The unit is tested by an independent test house and applies to EN 60950-1:2006 including Amendment A11:2009 and Amendment A1:2010 EMC test is passed. To require full test report please contact Leba Innovation. -
Page 11: Warranty
Warranty NoteSync is covered by 2 years warranty covering labor and parts. Product must be returned to Leba Innovation for repair. NOTICE Please be aware that warranty is void if seal is broken... -
Page 12: Register Product
Register product Register product and get free support, news and free sw updates. Simply email these information’s to: notesync@leba-innovation.com Institution/firm Contact name e-mail address NoteSync serial number or numbers Date of purchase Leba Innovation Gisselfeldvej 12a DK – 4690 Haslev...
Need help?
Do you have a question about the NoteSync and is the answer not in the manual?
Questions and answers