Canon Compatibility
Can be used on FlexTT5 as a receiver in E-TTL mode only.
Cannot be used on MiniTT1 or FlexTT5 as a transmitter.
This flash performs better if an OC-E3 cable is used.
BASIC TRIGGER MODE: Almost all cameras and flashes are compatible with the MiniTT1 and FlexTT5 when the
radios are configured for Basic Trigger Mode. Basic Trigger Mode disables all flash power control and TTL
functions of the radios.
3rd Party Speedlite Compatible Flashes
Metz
58 AF-1 (Metz firmware v5.0)
48 AF-1 (Metz firmware v4.0)
These flashes can only be used if Pre-Flash Boost is disabled on the Flash Tab in the PocketWizard Utility is
disabled. Note: Pre-Flash Boost is disabled by default.
These flashes may only be used on a remote FlexTT5 used as a receiver. They are not compatible as on-camera
MASTER flashes.
Nissin
The Nissin Di622, Di622 Mark II, Di866, and Di866 Mark II for Canon are currently compatible with ControlTL
radios (such as the MiniTT1 and FlexTT5) with certain limitations. Please see our Nissin Compatibility page for full
details.
Operational Notes
ControlTL Remote Camera
Using the default settings, remote cameras with a receiving FlexTT5 will be limited to Single Shot mode and there
will be a delay between subsequent triggers. To learn more about remote camera triggering with ControlTL radios,
visit our Remote Camera Triggering page.
Camera-Specific Operational Considerations
For more information about operational considerations that may affect your camera specifically, choose the model
below:
Currently Supported Cameras
Canon 1D X
Canon 7D
Canon 1D Mark IV
Canon 6D
Canon 1Ds Mark III Canon 5D Mark III Canon 50D Canon Rebel SL1 (100D)
Canon 1D Mark III
Canon 5D Mark II Canon 40D Canon Rebel T4i (650D)
Canon 1Ds Mark II
Canon 5D
Canon 1D Mark II N
Canon 1D Mark II
Canon 70D Canon Rebel T5i (700D)
Canon 60D Canon Rebel T5 (1200D)
Canon 30D Canon Rebel T3i (600D)
Canon 20D
Canon Rebel T3 (110D)
Canon Rebel T2i (550D)
Canon Rebel T1i (500D)
Canon Rebel XSi (450D)
Canon Rebel XTi (400D)
17
Need help?
Do you have a question about the MiniTT1 and is the answer not in the manual?
Questions and answers