Panasonic DP-C406 Operating Instructions Manual page 16

No. 60 - 79
No. Parameter
60 Auto Tone Adjust
61 Tone Adjust Reset
65 Hard Disk Initialize
66 Hard Disk Error Check Set the hard disk error check.
67 Data Deletion of HD
68 HD Drive Lock
Settings
70 SD/USB Memory
Function
72 EWS Output Queue
73 Config. Editor
Password
16
Comments
If the coloured image tone has deviated, set the
automatic tone adjustment.
<Procedure>
1. Execute this mode to print the calibration
sheet.
2. Place the calibration sheet on the Platen
Glass and execute this mode again.
If "60 Auto Tone Adjust" has made the original
image tone indistinguishable, execute this mode
to reset the machine to the factory default
setting.
Set the Hard Disk Drive format/deletion.
When selecting "Deletion", set the deletion
security level of hard disk data. During the
deletion time, the machine cannot be used.
• Stop
Deletion is not executed.
• Medium
Deletion is completed within 2 hours.
• High
Deletion is completed within 3 hours.
Not required in the Copy mode, but needed
when installing options with advanced
functions.
Set deletion security level of hard disk data for
every copy/print job.
Every copy/print job data is automatically
deleted after each job is completed. For
higher security, select "Medium" or "High",
however, the deletion time increases with the
increase in security level.
Set the 32-digit HD Drive Lock password.
When the Set Hard Drive Lock is selected, the
machine requires rebooting, and the "Change
Lock Password" and "Release Drive Lock"
tasks must be carried out.
Set whether to use SD Memory Card and USB
Flash Memory.
Set whether to display the print job information
in the Output Queue on the Status screen of the
Embedded WEB.
Up to 10 print jobs can be displayed.
Set the password for the Configuration Editor.
Selective Item
Stop, Start
Stop, Start
• Format:
Stop, Start
• Deletion:
Stop, Medium, High
Stop, Start
Basic, Medium, High
Set Hard Drive Lock
No, Yes
Off, On
Up to 30 characters
Standard
Setting
Stop
Stop
Format
(Stop)
Start
Basic
Set Hard
Drive Lock
Yes
On