Panasonic GAS PLASMA DISPLAY Setup Manual page 5

MENU SETTINGS GUIDE FOR PANASONIC DISPLAYS
Power up the Panasonic display, using the remote control or the menu buttons on the
front of the display adjust the settings as outlined in the following spread-sheet. For
more information about this model please read the Panasonic Operating Instructions
PDF.
Y:\Projects\Plasma Y:\Projects\Plasma
Documents\Panasonic\Panasonic Setup.xls Documents\Panasonic\th42pwd5uy-oi-eng.pdf
MENU SETTINGS GUIDE FOR NEC DISPLAYS
Power up the NEC display, using the remote control or the menu buttons on the front
of the display adjust the settings as outlined in the following spread-sheet. For more
information about this model please read the NEC Operating Instructions PDF.
Note: Part of the setup includes locking out the menu buttons on this display. Only
the remote control can be used to access the setup menu after the initial setting have
been saved.
Y:\Projects\Plasma Y:\Projects\Plasma
Documents\NEC\Plasma settings.xls Documents\NEC\42VP4A_manual.pdf
PACKING AND SHIPPING COMPONENTS
Once the display has been setup and tested. Repackage the unit in the original
shipping container. Print off a copy off a copy of the Plasma Installation Guide
PDF from Outback. The shipping container should contain the following list of
supplies.
 Plasma Power cable
 Plasma Installation Guide
http://w2/LSGLTS/documentation/tvmounts/Plasma%20Installation%20Guide.pdf
 Assign and attach an Asset tag to the lower right side of the display
 FSA adaptor plate, matching the model of Plasma to the wall or ceiling mount being shipped.
 It is not necessary to send the remote controls with either display.
British Columbia Lottery Corporation
74 West Seymour Street Kamloops, BC V2C 1E2
Lottery Technical Serviceswww.bclc.com
5