Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. Safety precautions WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
To prevent the TV from falling over: Use the two small plastic loops on the back of the TV set, and connect them to a wall or column using two secure wires or strong cords. • The wire or strong cord, and wall ring (or similar attachment), are not supplied with this TV set.
Setting up your TV CAUTION •Turn off all the epuipment including the TV before connecting anything. 1 Connecting the aerial and VCR •Aerial cable is not supplied. Use a good quality 75-ohm coaxial cable. •Read the manual that came with the VCR before connecting.
Page 5
TV is in the standby mode. Press the POWER button on the remote control to turn the TV on. •If the JVC logo does not appear, your TV has already been turned before. In this case,use the "LANGUAGE" and "AUTO PROGRAM"...
Page 6
6 Press the MENU/OK button to end the convergence adjustment procedure. • If you do not use the TV controls for roughly one minute, the convergence adjustment screen automatically disappears. Now, the setting up is complete. Please enjoy your new JVC TV! buttons to adjust the...
TV buttons and functions (Behind the cover) MENU CHANNEL S-VIDEO Turn the main power on Press the main power button 1 . The POWER lamp 2 lights red and your TV is in the standby mode. To turn the main power off : press the main power button again.
Remote control buttons and functions TV/VIDEO ZOOM SPATIALIZER BASS RETURN MULTI MUTING SUB-P POSITION FREEZE MENU/ SYSTEM COLOUR SOUND HOLD MODE REVEAL SUBPAGE STORE CANCEL TEXT Turn the TV on from standby mode Press the POWER button. The POWER lamp lights red to green and your TV will be turned on.
MUTING button Press the MUTING button to turn off the volume. Pressing the MUTING button again resumes the previous volume level. •When the TV’s MUTING function is on, displayed on the screen. However, to prevent screen burn-in, the mark automatically dims if no TV operation has been performed for a period of about one minute.
Remote control buttons and functions To cancel register a TV channel as the "Return Channel" : while viewing any TV channel, press the RETURN+ button and hold for more than 3 seconds continuously. "RETURN PLUS CANCELED!" is displayed and the registration is cancelled. •When you turn off the TV, the registration for the "Return Channel"...
COLOUR SYSTEM button The colour system is chosen automatically. However, if the picture is not clear or no colour appears, choose the colour system manually. Press the COLOUR SYSTEM button to choose the appropriate colour system. AUTO : This function detects a colour system from the input signal.
Remote control buttons and functions FREEZE button You can view the Main picture's frozen image as the SUB-picture. Press the FREEZE button. Still pictures MAIN To cancel the FREEZE function : Press the FREEZE button again. •You cannot use the FREEZE button when the SUB- picture or the MAIN-picture are displayed on the screen.
Using the PIP function You can view two pictures (MAIN and SUB) at the same time. Press the PIP button. Press the PIP button changes the display as follows: Twin pictures mode MAIN Picture in picture mode MAIN Cancel the PIP function •You cannot view a picture from the same programme number (or the same VIDEO terminal) as both the MAIN-picture and the SUB-picture at...
Remote control buttons and functions Viewing a teletext programme 1 Choose a TV channel with a teletext broadcast. 2 Press the TV/TEXT button. Press the TV/TEXT button changes the mode as follows: TV mode 3 Choose a teletext page by pressing the CHANNEL-/+ buttons, number buttons or coloured buttons.
SUBPAGE button Some teletext pages include sub-pages that are automatically displayed. You can hold any sub-page, or veiw it at any time. 1 Press the SUBPAGE button to operate the Sub-page function. Sub-page numbers are displayed at the left of the screen.
Using the TV's menu This TV has a number of functions you can operate using menus. To fully utilize all your TV's functions, you need to understand the basic menu operating techniques fully. POWER TV/VIDEO PICTURE ZOOM SPATIALIZER BASS RETURN MULTI MUTING NEXT...
PICTURE SETTING menu PICTURE MODE You can choose one of three PICTURE MODEs to adjust the picture settings automatically. BRIGHT: Heightens contrast and sharp- ness. STANDARD: Standardizes picture adjustment. SOFT: Softens contrast and sharpness. •You can also operate the PICTURE MODE function with the PICTURE MODE button on the remote control.
Using the TV's menu PICTURE FEATURES menu DIGITAL VNR The DIGITAL VNR function cuts down the amount of noise in the original picture. •You cannot select the DIGITAL VNR function when receiving the Progressive Video Signal (525P signal). AUTO: The TV will be automatically adjust the level of the DIGITAL VNR effect to match the amount of noise in the picture, giving you the...
COLOUR SYSTEM The colour system is chosen automatically. However, if the picture is not clear or no colour appears, choose the colour system manually. 1 Choose COLOUR SYS- TEM, then press the MENU/OK button. 2 Press the buttons to choose the appropriate colour system.
Using the TV's menu SOUND SETTING menu STEREO / I•II When you are viewing a bilingual broadcast programme, you can choose the sound from Bilingual I (sub I) or Bilingual II (sub II). When the stereo broadcasting is received poorly, you can change from stereo to mono sound so that you can hear the broadcast more clearly and easily.
TV SPEAKER: When this function is on, the TV’s speaker does not shut off the sound even if headphones are connected. OUTPUT: You can choose the sound from the MAIN-picture(MAIN) or the SUB-picture(SUB) when using the headphones. •The TV’s speaker does not out put the sound from the SUB- picture.
Page 22
Using the TV's menu 3 Press the MENU/OK button. 4 Press the buttons to choose a TV channel. •The TV shows the TV programme which the chosen TV channel is now broadcasting. 5 Press the blue button to set this function to the TV channel.
INSTALL menu LANGUAGE You can choose the language you want to use for the on-screen display from the language list in a menu. 1 Choose LANGUAGE, then press the MENU/OK button. 2 Press the buttons to choose a language. 3 Press the MENU/OK button to complete the setting.
Page 24
Using the TV's menu EDIT/MANUAL FUNCTIONS MOVE 1 Press the buttons to choose a TV channel. 2 Press the button to start the MOVE function. 3 Press the buttons to choose a new programe number. To cancel the MOVE function: Press the DISPLAY button.
Page 25
4 Press the Number but- tons to enter the remaining CH/CC number. The TV shifts to registration mode. When the registration is com- pleted, the picture of the TV channel appears on the screen. •The CH/CC number is a number indicating the broadcast frequency to the TV.
Page 26
Using the TV's menu TELETEXT LANGUAGE There are 4 types of teletext language groups. Set the teletext language group that corresponds to the language of the teletext program that you want to watch. 1 Choose TELETEXT LAN- GUAGE, then press the MENU/OK button.
Additional preparation Connecting the external devices Connect the devices to the TV, paying attention to the following connection diagram. Before connecting anything: •Read the manuals provided with the devices. Depending on the devices, the connection method may differ from the figure. In addition, the device settings may be changed depending on the connection method to secure proper operation.
Additional preparation Connecting methods 1 Connect the TV's VIDEO jack and the device's VIDEO OUT (video output) jack with a video cable. If connecting a device to the TV with an S-VIDEO cabel: Connect the VCR's S-VIDEO OUT (S-VIDEO output) connector and the TV's S-VIDEO connector with an S-VIDEO cable, instead of connecting with a video cable.
Page 29
Connecting AV COMPU LINK Supported Devices AV COMPU LINK remote control system is a system in which related devices are automatically controlled when you operate one device. If you apply this system to the TV, you can have the TV automatically perform the required operations by operating one external device.
Troubleshooting If a problem arises while you are using the TV, please read this "Troubleshooting" well before you request having the TV repaired. You may be able to fix it easily by yourself. For example, if the AC plug is disconnected from the AC outlet, or the TV aerial has problems, you may think there is a problem with the TV itself.
Page 31
Operation disabled •Have the batteries of the remote control become exhausted? Follow the description "Putting the Batteries into the Remote Control" on page 4 and replace them with new batteries to try solve the problem. •Have you attempted to use the remote control at the sides or rear of the TV or at a location more than seven meters apart from the TV location? Operate the remote control in the front of your TV...
Specifications Broadcasting systems Colour systems Channels and frequencies Sound-multiplex systems Teletext systems Lauguages displayed by teletext Power requirements Power consumption Screen size Audio output Speakers VIDEO-1 terminal VIDEO-2 terminal VIDEO-3/COMPONENT terminal VIDEO-4 terminal OUTPUT terminal Headphone jack Dimensions(W X H X D) Weight Accessories Design and specifications subject to change without notice.