Trim Cover Assembly; Remove And Re-Install; Kick Plate - Electrolux EI15TC65HS Technical & Service Manual

14 Section B – Cabinet

Trim Cover Assembly

REMOVE AND RE-INSTALL

TABS
TRIM COVER
1. Remove door (see Door Assembly).
2. Using a fl at-head screwdriver, gently pry the fi rst of
four tabs of the top trim cover away from the side
of the cabinet. After you have pried off the fi rst tab,
gently grasp the cover and pry away the other three
tabs in order, one at a time, to completely remove
the cover.

Kick Plate

The kick plate on the front of the compactor is secured to
GASKET
the unit with two Phillips head screws (see above). If the
plate becomes scratched or dented, replace it.
It may be necessary to adjust the height of the leveling
legs to allow the bottom of the kick plate to separate from
the base.
SCREWS