Samus Special Electronics SAMUS - 725G Instruction Manual

SAMUS SPECIAL ELECTRONICS
SAMUS - 725G
ELECTROFISHER
PROFESSIONAL FISHING DEVICE
INSTRUCTIONS - MANUAL
European standard EN-60335-2-86 Safety of household and similar electrical appliances Part
2-86: Particular requirements for electric fishing machines (IEC 60335-2-86: 1998 modified)
Dear user ! You have purchased a modern electrofisher SAMUS-725G
designed for electrofishing in freshwater lakes and rivers.
This model has a built-in microcomputer that gives you the higher
reliability, many service functions, efficiency and satisfaction while working
with our electrofisher. Its parameters are taken in such a way to enable high
levels of fishing and minimise harmful influence of electric field on water
fauna.
In the course of designing SAMUS-725G we have used long-term
experience of a firm "SAMUS Special Electronics" in this field as well as
experience of our colleagues who also project and fish by the means of similar
instruments.
ELECTROFISHER SET - SAMUS-725G
The set of electrofisher SAMUS-725G consists of:
!
Electrofisher SAMUS-725G
!
Cable of steering with press-release button and micro-switcher
!
Outer cable "-" with metal wire at the end
!
Outer cable "+" for installation in the landing net
!
This manual
For complete electrofishing you need only any plastic landing net , 12
Volt battery ( accumulator) and any boat to move on the water. Electrofishing
from the bank is not effective.
TECHNICAL DESCRIPTION OF SAMUS-725G
!
Built on MOSFET transistors.
!
Voltage of inverter 550-600 Volt- Impulse aperiodic up to 1000V
!
650 watts of output power ( in order to achieve high-reliability )
Electrofisher has a built-in microcomputer, which allows to regulate frequency
and duration (length) of impulses by the means of keyboard and also indicates
on digital display:
!
Frequency and duration ( length) of going out electric impulses ( frequency
and duration of output impulses are stable, does not depend on power
supply voltage or loading)
!
Exit power in watts
1