Do you have a question about the Compressor and is the answer not in the manual?
Questions and answers
Рамиль
February 1, 2025
Как снимается крышка реле на компрессоре?
1 comments:
Mr. Anderson
February 10, 2025
To remove the relay cover on an Embraco compressor:
1. Locate the cover and identify any securing mechanisms. 2. Tilt the cover back to release it, as it cannot be accessed directly from the front. 3. Slide the cover out carefully. 4. If the area is tight, ensure there is enough clearance by adjusting surrounding components. 5. Identify and release any hooks or tabs securing the cover. 6. Once released, slide the wires back in place if necessary before reassembling.
Need help?
Do you have a question about the Compressor and is the answer not in the manual?
Questions and answers
Как снимается крышка реле на компрессоре?
To remove the relay cover on an Embraco compressor:
1. Locate the cover and identify any securing mechanisms.
2. Tilt the cover back to release it, as it cannot be accessed directly from the front.
3. Slide the cover out carefully.
4. If the area is tight, ensure there is enough clearance by adjusting surrounding components.
5. Identify and release any hooks or tabs securing the cover.
6. Once released, slide the wires back in place if necessary before reassembling.
This answer is automatically generated