2. Description 2.1 Use of the product as directed The SFC 14-A is a hand-held, cordless drill / driver for driving and removing screws and for drilling in steel, wood and plastic. Working on materials hazardous to the health (e.g. asbestos) is not permissible.
Grease lubrication 2.6 The items supplied include (toolbox versions): 1 Power tool 1 Operating instructions 1 Hilti toolbox 2.7 The items supplied include (cardboard box versions): 1 Power tool 1 Operating instructions 2.8 Additional items required for operating the tool B 14/3.3 or B 14/1.6 Li ion battery with C 4/36, C 4/36 ACS or C 4/36 ACS TPS battery charger.
80 dB (A) 14-A Typical A-weighted emission sound pressure level 69 dB (A) for the SFC 14-A. 3 dB (A) Uncertainty for the given sound level Triaxial vibration values (vibration vector sum) measured in accordance with EN 60745 2 2 Screwdriving without impact action, a 1.0 m/s...
6.1 Battery use and care NOTE DANGER Battery performance drops at low temperatures. Use Use only the Hilti batteries and Hilti chargers listed a battery only when it has been fully charged. This under “Accessories”. ensures that maximum battery capacity is available.
2. Pull the battery out of the power tool toward the is switched off and that the safety lock is engaged rear. (forward/reverse switch in the middle position). Use only the Hilti batteries approved for use with this 6.5 Belt hook 3 power tool. CAUTION...
Dispose of defective batteries without delay. Keep them out of reach of children. Do not attempt to open or dismantle batteries and do not dispose of them by incineration. CAUTION Dispose of the batteries in accordance with national regulations or return them to Hilti.
15:47 Uhr Seite 14 Most of the materials from which Hilti power tools or appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking back your old power tools or appliances for recycling. Please ask your Hilti customer service department or Hilti representative for further information.
Need help?
Do you have a question about the SFC 14-A and is the answer not in the manual?
Questions and answers