Sending The Hex Image Using Ipl - Motorola MC17 Product Reference Manual

9 - 10 MC17/MC17A/MC17T/MC17U Product Reference Guide

Sending the Hex Image Using IPL

Once the hex file is built, it can be downloaded to the mobile computer using IPL.
NOTE The mobile computer must be inserted in the cradle with appropriate power supply connected to a power
source, for the mobile computer to reset into IPL.
Press and simultaneously hold the Up Arrow and Down Arrow keys for 10 seconds.
1.
Press and hold the Scan key for 10 seconds and release the Up Arrow and Down Arrow keys.
2.
The screen blanks.
3.
The Initial Program Loader menu displays.
4.
Release the Scan key.
5.
Initial Program Loader
Platform
Application
Config Block
Windows CE
Monitor
Splash Screen
Power Micro
Partition Table
Command File
System Reset
Service Battery
Auto Select
Initial Program Loader (IPL) Menu
Figure 9-7
CAUTION
NOTE The hex images must be downloaded in the following order:
1. Monitor (mobile computer resets after downloading monitor)
2. Config Block
3. Partition Table and Power Micro
4. Platform, Splash Screen, Application and Windows CE.
If the platform or application partition sizes are changed, you must download a new partition table first.
Choose Auto Select or use the up and down scroll buttons to select the partition to download, then press
6.
Enter.
To insure a successful download, do not remove power from the mobile computer while in IPL mode.