Table of Contents
Advertisement
USING THE OPTIONAL AC ADAPTER
Insert batteries into the battery compartment even when using the AC
adapter.
NOTES:
• Never unplug the power cord with wet hands.
• Use only exclusive AC adaptor specified by Omron dealers. Use of
unsupported adapters may damage the unit.
• When storing the optional AC adapter in the storage case with the
main unit, be careful not to damage the main unit or cuff.
1. Insert the AC adapter plug into the
AC adapter jack on the rear side of
the main unit.
2. Plug the AC adapter into an
electrical outlet.
To disconnect the AC adapter, unplug the AC adapter from the electrical
outlet first and then immediately remove the AC adapter plug from the
main unit.
26
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SEM-2 and is the answer not in the manual?
Questions and answers
how to check battery’s charge level
To check the battery charge level for the Omron SEM-2, look for the battery low symbol ( ) on the display. If the symbol appears, the batteries are low and should be replaced soon. If the symbol blinks, the unit can still be used for a short time. If the symbol stays lit, replace all four batteries with new ones.
This answer is automatically generated