Epson DM-D110 Technical Reference Manual page 19

2.4.1.4 Precautions on using the power supply unit
To avoid damage to the DM-D110 and the power supply unit, make sure to note the following
points.
Use the optional Seiko Epson products, PS-180 as the power supply.
Never connect the DC cable to the power supply unit when the power supply unit is
connected.
Unplug the DC cable by holding the connector part. If you pull the cable to unplug it, it may
be damaged.
2.4.1.5 Assembling steps
1. Pass the cable for the DM-D110 through the DM-D stand.
When extending the length of the DM-D stand, attach the extension support (DP-105) to the
DM-D stand.
. A
Rev
DM-D110 Technical Reference Guide
When using the
extension support
(DP-105)
Setup information 2-5