Nikon D810 User Manual page 372

❚❚ Press + Command Dials
Selecting Press + command dials displays the following
options:
Option
Choose image
i
area
Shutter spd &
$
aperture lock
1 step spd/
v
aperture
Choose non-CPU
w
lens number
Active
y
D-Lighting
Exposure delay
&
mode
None
348
Press the Fn button
and rotate a
command dial to
choose from pre-
selected image areas
(0 74). Selecting
Choose image area
displays a list of image areas; highlight options
and press 2 to select or deselect, then press J.
Press the Fn button and rotate the main
command dial to lock shutter speed in modes f
and h; press the Fn button and rotate the sub-
command dial to lock aperture in modes g and
h. See page 126 for more information.
If the Fn button is pressed when the command
dials are rotated, changes to shutter speed
(exposure modes f and h) and aperture
(exposure modes g and h) are made in
increments of 1 EV, regardless of the option
selected for Custom Setting b2 (EV steps for
exposure cntrl, 0 315).
Press the Fn button and rotate a command dial to
choose a lens number specified using the Non-
CPU lens data option (0 229).
Press the Fn button and rotate the command
dials to adjust Active D-Lighting (0 182).
Press the Fn button and rotate a command dial to
choose an exposure delay mode (0 322).
No operation is performed when the command
dials are rotated while the Fn button is pressed.
Description