Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hill Audio IMA-200
Summary of Contents for Hill Audio IMA-200
- Page 1 RevA 12-2013...
-
Page 2: Important Safety Instructions
USER MANUAL - IMA200 INSTALLATION MIXER | AMPLIFIER Welcome Thank you for choosing Hill Audio for your sound system. To make sure that this product meets your expectations and provides long-term, reliable performance, please read and follow this instruction manual carefully. -
Page 3: Health Advice
USER MANUAL - IMA200 INSTALLATION MIXER | AMPLIFIER Description The IMA200 is a combination of a basic mixer for music and a microphone, a media player with FM tuner and IR remote control, and a dual power amplifier which can either work in dual mono or in stereo configuration. -
Page 4: Configuration Setup
USER MANUAL - IMA200 INSTALLATION MIXER | AMPLIFIER Configuration setup Before using the IMA200, it must be configured to match the application. Make sure the unit is unplugged from AC mains and remove the top cover to gain access to the internal elements, then set switches and jumpers as per following instruction. -
Page 5: Setup Information
USER MANUAL - IMA200 INSTALLATION MIXER | AMPLIFIER Setup Information Pre-Amplifier PCB This jumper determines the phantom power setting for the microphone input (14). Position the jumper in ON position to add +12V DC phantom power to the microphone input for the use of condenser microphones. -
Page 6: Controls And Connections
USER MANUAL - IMA200 INSTALLATION MIXER | AMPLIFIER Controls and Connections Connections - Rear (Outputs) Connections - Rear (Inputs) Controls - Front (Mixer | Outputs) PAGE 5... -
Page 7: Functional Description
USER MANUAL - IMA200 INSTALLATION MIXER | AMPLIFIER Controls - Front (Media Player | Tuner) Display - Elements Remote Control - Elements Functional Description The IMA200 is a combination of a single-microphone & music mixer, a media player with FM tuner and jingle player, and a stereo low-impedance power amplifier. - Page 8 USER MANUAL - IMA200 INSTALLATION MIXER | AMPLIFIER Output Mute connector. This is a terminal block input which allows to remotely mute all output signals (Speakers, PreAmp) by simply shortening the contacts. Emergency input. This is an auto-sensing, balanced terminal block input which allows the connection to an emergency evacuation system.
- Page 9 USER MANUAL - IMA200 INSTALLATION MIXER | AMPLIFIER Aerial socket. Plug in the supplied FM antenna here, or connect any suitable antenna cable of the house installation here (75 Ohms cable). MUSIC source selector. This rotary 4-psotion switch allows to choose any of the 3 rear-side Line inputs (12) to be the music source, or the internal media player/FM tuner.
- Page 10 USER MANUAL - IMA200 INSTALLATION MIXER | AMPLIFIER USB memory socket. Insert a FAT32-formatted USB memory stick of max 16GB with a one- level folder structure for replay of MP3 files here. If a SD card is already inserted into (29), the SD card will be given priority.
-
Page 11: Display Elements
USER MANUAL - IMA200 INSTALLATION MIXER | AMPLIFIER SOURCE button. Toggles the program source between Media play and FM Tuner. If FM Tuner is chosen as the program source, the display’s FM Mode indicator (49) is lit while the media replay related indicators (50/51/52) are disabled. - Page 12 USER MANUAL - IMA200 INSTALLATION MIXER | AMPLIFIER File Name Display Indicator. In Media play mode, this indicator shows the current content of the Clear text readout (46) is a file name. This indicator is not used in FM mode. Source Mode Indicator.
-
Page 13: Jingle Player
USER MANUAL - IMA200 INSTALLATION MIXER | AMPLIFIER Notes on files, folders and data conventions The media player section build into this unit is a hardware player and as such subject to various restrictions, which are useful to be aware of: Media Memory types. -
Page 14: Operation
USER MANUAL - IMA200 INSTALLATION MIXER | AMPLIFIER Operation A. Connections For connecting this unit to AC mains, please note: Check whether the AC mains voltage and frequency is the same as this product is specified for (see rear panel of product). Whenever the specified voltage or your AC plug should not match the local conditions, do NOT plug the AC cord into the wall outlet and contact you dealer immediately. - Page 15 USER MANUAL - IMA200 INSTALLATION MIXER | AMPLIFIER D. Practical use of the Media Player / FM Tuner To get familiar with the media player / FM tuner part of this unit, prepare a solid state media of 16GB or less memory size, formatted in FAT32, and loaded with the following content: A Number of folders which are generated on the media in the sequence they are supposed to be listed on the unit later, with folder names not longer than 10 digits MP3 files stored in each folder with file names possibly not longer than 30 digits and sufficient dif-...
- Page 16 USER MANUAL - IMA200 INSTALLATION MIXER | AMPLIFIER Connections This unit uses the below connector types, for which the pin assignment must comply with the following specification. Always make sure to use good connectors and cables to ensure proper operation. Balanced connections are to be preferred over unbalanced connections where applicable and feasi- ble.
-
Page 17: Technical Specifications
USER MANUAL - IMA200 INSTALLATION MIXER | AMPLIFIER Technical Specifications Preamplifier Section General Data Signal/Noise..........82dB (Line) AC IN (EU version)......AC220-250V~ 50Hz Crosstalk Damping........65dB (Line) AC IN (US version)......AC110-120V~ 60Hz THD............0.05% (Line) Power consumption........max. 200W Frequency response.........20Hz – 20 kHz Dimensions....W483(447)xH44.5xD194.0mm (parentheses = without rack ears) Power Amplifier Section... - Page 18 USER MANUAL - IMA200 INSTALLATION MIXER | AMPLIFIER PAGE 17...
- Page 19 USER MANUAL - IMA200 INSTALLATION MIXER | AMPLIFIER PAGE 18...
-
Page 20: Ec Declaration Of Conformity
ROHS Directive 2002/95/EC and is marked as follows: Shoeburyness, 24. January 2014 Place and date of issuing Authorized Signature www.hill-audio.com Hill Audio products are developed, manufactured and distributed by Adelto Technologies Vanguard Way, Shoeburyness, Essex SS3 9QY, UK www.adelto.com | sales@adelto.com...
Need help?
Do you have a question about the IMA-200 and is the answer not in the manual?
Questions and answers