Table of Contents
Advertisement
5-Speed drill preSS
Set up And OperAting inStructiOnS
distributed exclusively by Harbor Freight tools
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
SAVe tHiS MAnuAl.
Copyright
1998 by Harbor Freight Tools
©
contained herein may be reproduced in any shape or form without the express written consent of Harbor
Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements,
actual product may differ slightly from the product described herein.
For technical questions or replacement parts, please call 1-800-444-3353.
Model
3491 Mission Oaks Blvd., Camarillo, CA 93011
. All rights reserved. No portion of this manual or any artwork
®
38119
.
®
revised 08a
Advertisement
Table of Contents
Related Manuals for Central Machinery 38119
Summary of Contents for Central Machinery 38119
-
Page 1: Set Up And Operating Instructions
5-Speed drill preSS Model 38119 Set up And OperAting inStructiOnS distributed exclusively by Harbor Freight tools ® 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com read this material before using this product. Failure to do so can result in serious injury. -
Page 2: Technical Specifications
Maximum distance from chuck to Base: 10” Maximum Swing: 9-1/2” column diameter: 1.89” table Size: 6-5/16” x 6-1/2” Overall dimensions: 23” x 7” x 17” Base Size: 7” x 11-1/8” rev 99f, 07b SKU 38119 For technical questions, please call 1-800-444-3353. Page 2... - Page 3 D. Base E. Head assembly F. Head Assembly G. One (1) bag of loose items 4 MM 5 MM i.d. x 11 MM O.d. Flat Washer Figure 1 reV 01b SKU 38119 For technical questions, please call 1-800-444-3353. Page 3...
-
Page 4: Know Your Drill Press
Free of damp, wet or rainy conditions Free of flammable gasses or liquids Childproof - use padlocks, master switches and remove starter keys when not in use. Well-lit and well-ventilated SKU 38119 For technical questions, please call 1-800-444-3353. Page 4... -
Page 5: Before Operating
Any part that is damaged should be properly re- paired or replaced by a qualified technician. Do not use the tool if any switch does not turn off and on properly. SKU 38119 For technical questions, please call 1-800-444-3353. Page 5... -
Page 6: Table To Column
4 table to column Thread the Table Support Locking Handle (#6) into the Table Sup- port (#4) from the left hand side, and leave it loose until later. SKU 38119 For technical questions, please call 1-800-444-3353. Page 6... -
Page 7: Installing The Chuck
1/2” at its center when using reasonable thumb pressure. Lock the motor in this position using the locking screw. note: If the belt slips during operation, adjust the belt tension. reV 01b SKU 38119 For technical questions, please call 1-800-444-3353. Page 7... -
Page 8: Settings And Adjustments
“To Set Drilling Depth” section — until the drill contacts the work, setting the pointer (D) against a set point on the scale (H), switching the drill ON and proceeding to drill to the required depth using the scale (H) as a guide. SKU 38119 For technical questions, please call 1-800-444-3353. Page 8... -
Page 9: Operation
IF THE MATERIAL IS IRREGULARLY SHAPED and cannot be laid flat on the table, it should be securely blocked and SKU 38119 For technical questions, please call 1-800-444-3353. Page 9... -
Page 10: Cutting Speeds
Make sure all components are dry and machined surfaces lightly oiled. Remove drill bits and store in a safe place. Child-proof the machine and work area. Make sure to use padlocks, master switches and remove starter keys. SKU 38119 For technical questions, please call 1-800-444-3353. Page 10... -
Page 11: Extension Cords
5.1 – 7.0 7.1 – 12.0 12.1 – 16.0 16.1 – 20.0 tABle A * Based on limiting the line voltage drop to five volts at 150% of the rated amperes. SKU 38119 For technical questions, please call 1-800-444-3353. Page 11... -
Page 12: Maintenance
When servicing, use only identical replacement parts. Use of any other parts will void the warranty. StOrAge: Always remove and store drill bits. Keep Out OF reAcH OF cHildren troubleshooting SKU 38119 For technical questions, please call 1-800-444-3353. Page 12... - Page 13 Spacer 1302023 Pulley Insert 0802022A Retaining Ring 22mm GB894.1-86C Spindle Pulley 0805006D Hex Socket Set Screw GB80-85 Pan Head Screw M5 GB818-85B Cable Clamp 1502014A Foam Washer 0805009 reV 01d SKU 38119 For technical questions, please call 1-800-444-3353. Page 13...
-
Page 14: Item Description
Feed Handle 0804005F Hex. Nut 3/8 Pinion Shaft 0804002E Hex. Nut M10 GB6171-86 Hex. Nut M8 GB6170-86C Pointer 0806002 Fit Set Screw M8 0802021 Power Cable 1302015F Ext. Lockwasher 5mm GB862.1-87 SKU 38119 For technical questions, please call 1-800-444-3353. Page 14... -
Page 15: Quill Assembly
Hex. Nut M4 GB6170-86 Hex. Hd. Screw 1/2” Pan Hd. Screw M5x20 GB818-85 Table 0801014 Hex. Nut M6 GB6170-86 Chuck 1303009 Collar 0803004 Retaining Ring GB894.1-86 Chuck Key 1303010 reV 01b SKU 38119 For technical questions, please call 1-800-444-3353. Page 15... -
Page 16: Limited 90-Day Warranty
This product contains or, when used, produces a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. (California Health & Safety Code § 25249.5, et seq.) REV 08b SKU 38119 For technical questions, please call 1-800-444-3353. Page 16...
Need help?
Do you have a question about the 38119 and is the answer not in the manual?
Questions and answers
Distance between slots on table