NEC DT730G (CG): ITL-12CG-3 User Manual page 119

1.
• To Lock the Telephone
STEP 1:
Press Security on the telephone. The
following message is displayed on LCD.
STEP 2:
Press
(Enter)
Security mode.
STEP 3:
When the telephone is placed in Security
mode, Security Lamp lights red and the
screen saver will be activated.
• To Unlock the Telephone
STEP 1:
Display the Password Entry screen by
either of the following operations.
Press any key while the screen saver is
activated.
Press Security while the screen saver is
activated.
or OK to place DT730G in
STEP 2:
Enter the password and press
OK. Security Lamp goes off and Security
Mode is canceled.
Note:
The default password to release a security lock is 0000. Be
sure to change the default password before placing the
telephone in security mode. For details on the password
setting, see Change Password
When the password entry ends in failure, the following
TIP
error message is issued. In that case, press
and retry.
111
or
(Enter)
in Terminal Setup.
or OK